This QRP HF transceiver is for use at home, in...
This QRP HF transceiver is for use at home, in mobile or portable activity, Xiegu X108G Outdoor V2 is a transceiver for HF bands covering 0.5 to 30 MHz with 20 watts maximum in AM, SSB and CW. This is the new upgraded version of the previous X108.
With better reception and an improved signal-noise, the new Xiegu X108G Outdoor version has a 2.4k filter for SSB and a narrow 500 Hz filter for CW (Morse), TCXO 0.5ppm and Noise Blanker filter included.
Main functions of X108G V2: Large OLED color display, double VFO, AGC, preamplifier and signal attenuator, RIT control, power adjustable from 1 to 20 Watts, mode split, SWR, PWR and ROS display with protective circuit in case of high SWR to protect the transceiver.
Comes complete with: QRP Xiegu X108G V2, DC 12V power cable, hand microphone with numeric keypad, USB programming cable, manual in english.
This material is no longer available in our shop, it is replaced by the HF SDR Xiegu G90.
Drivers V1.3.1 for X108G Outdoor & Windows 64 bits 5.53M
Manual and documentation Xiegu X108G Outdoor 2016 (in english) 933.76k
RX frequency: 0.5 ~ 30MHz
TX frequencies: All Amateur HF bands
Modulation Mode: SSB (J3E), CW (A1A), AM (A3E)
Antenna Connector: SO239 (UHF female)
Frequency stability: ± 0.5ppm
Operating voltage: 12 ~ 14.5V DC
Consumption RX: 600mA max
Consumption TX: 7.5A max 20 watts
Power: from 1 to 20W (@ 13.8V)
Selective filters SSB 2.4kHz (-6dB) and narrow CW 500Hz (6dB)
IF frequency 10.7 MHz
Audio output: 0.5W Speaker 8 ohm
Operating temperature: -10 ℃ ~ + 60 ℃
Dimensions: 120 * 45 * 180 (mm)
Weight: Around 1kg
1 year warranty, CE
The Xiegu X108G can be controlled by CAT mode using the configuration for ICOM IC-7000, it can also be updated by firmware via PC (USB cable included).
The transceiver can be TX opened on all frequencies, this modification voids the warranty of the unit and consists of removing a CMS resistance on the PCB. under the sole responsibility of the user.
- Press the button VFO and hold
- Connect the USB cable to the computer and X108G
- Open Windows Explorer and go to the tree "My Computer," you must find a new X108 storage device
- Open Update X108, delete the file on the radio , a progress bar is displayed
- Copy the latest firmware update and wait for the complete copy of the file on the radio and unplug the computer's USB cable
- Restart X108G, the firmware update is complete!
Find the group of users Xiegu X108G on:
- Yahoo: https://groups.yahoo.com/neo/groups/X108-Transceiver/info
- Facebook: https://www.facebook.com/groups/578581345625251/
Invented by G5RV amateur, R. Louis VARNEY published for the first time the technical documentation of its antenna in November 1966. The G5RV wire antenna have 2 versions: 1/2 half size, about 16
The Xiegu X5105 V3* is a QRP portable HF+6M transceiver, SSB / CW / AM / FM / RTTY / PSK / FT8** modes, with a high-capacity 3800mAh battery, an integrated automatic antenna tuner, and a front-end
The Yaesu FT-857D is one of the most successful multi-band HF / VHF / UHF and multimode AM / FM / SSB / CW / PACKET mobile transceiver in the world. It covers in reception the bands of 0.1 to 56 MHz,
The new Yaesu FT-818 ND is the replacement of the famous QRP FT-817 ND from Yaesu. Compared to the FT-817, the FT-818 is equipped with a TCXO-9 and offers 6W on 13.8V and 2.5W power supply on built-in
To use an HF antenna below 50Mhz band, a ground plane are required. This is not always possible or easy especially for antennas with magnetic base or for installations on a balcony. Diamond MAT-50
The Yaesu FTDX-3000 (D) transceiver is the latest in the Yaesu FTDX range, covering all HF radio bands from 160m to 10m and the 6m (50 MHz) band with 100W SSB power.The FT-DX3000D features: DSP
Multiband antenna from 7 to 30Mhz and with the 6m band (50Mhz) Komunica HF-PRO-2 for mobile and portable operation.Adjustable by sliding tube at the base.RX and TX frequencies: 7 - 30MHz and
Multiband antenna from 7 to 430Mhz Komunica HF-PRO-1 for mobile and portable operation for HF, 50Mhz, VHF-UHF. Adjustable by sliding tube at the base.RX and TX frequencies: 7 - 430MHzMax Power: 130W
The Xiegu G90 is a 20W portable HF amateur radio transceiver with a 24-bit SDR architecture, a built-in automatic antenna tuner, detachable display, 3cm (1.8 inch) high-brightness color TFT LCD
The Xiegu CE-19 extension port makes it easy to connect a PC or other terminals and modems to use the digital modes SSTV, RTTY, ROS, PSK31, FT8, FT4, etc.The card allows you to extend the MINI-DIN8
Laminated HamRadio Guide booklet, 2021 edition, 50 pages in A4 format (219 x 297 mm), in english bound by metal rings, for use at the station or on a laptop, in SOTA or IOTA. This booklet can be used
Icom IC-705 SDR QRP mobile transceiver station for HF, 50, 144 and 430MHz amateur radio band, with 5W on battery and 10W on external power supply (13.8V), reception from 30Khz to 200Mhz and from 400
Moonraker GPA-80 basic HF antenna for fixed use on the amateur radio bands from 3.5 to 57 MHz (80 Meters to 6 Meters) in TX transmission (with the use of an external tuner) and for reception in RX
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal