New Reduced price!

-5%

RSP1B SDR receiver 1kHz to 2GHz 14-bit + LNA + Bias-T + Metal case View larger
SDRPlay

SDRPLAY-RSP1B-2669

New product

United Kingdom

RSP1B SDR receiver 1kHz to 2GHz 14-bit + LNA + Bias-T + Metal case

rating No review at the moment

A new version of SDRPlay's receiver, the RSP1B covers all frequencies from 1 kHz to 2 GHz without gaps, in all modes*, with up to 10 MHz of screen bandwidth and 14-bit sampling.

The differences with the RSP1A :

  1. Solid metal case, painted black
  2. Noise reduction below 1 MHz and frequencies 3.5-5.5 MHz, 50-60 MHz and 250-320 MHz
  3. Improved signal management for HF frequencies

Supplied with: 1x SDRPlay RSP1B assembled in plastic case (without power cable).

Pre-order introductory price: €124.17 excluding VAT (available within 2-3 weeks).

See below for instructions for use and SDRplay support below.

* By default, the decoded modes are analogue AM, FM and SSB. By coupling other software for other modes, including digital, it is possible to decode any type of signal, depending on the decoding software used in addition to the SDR software.

More details

117,96 € tax excl.

124,17 €

Out of stock, available within 1 month

Download

Datasheet RSP1B (FR)

In french. 317.23k

Datasheet RSP1B (EN)

In english. 230.52k

SDRPlay comparison (FR)

In french. 77.56k

SDRPlay comparison (FR)

In english. 65.5k

Data sheet

  • Reception from 1 kHz to 2 GHz
  • Up to 10 MHz bandwidth
  • 14-bit sampling
  • TCXO 0.5PPM
  • Software-adjustable gain LNA preamp
  • 4.7V BIAS-T power supply
  • 11 AM / FM / DAB notch filters
  • RF shielding with metal case
  • Antenna connector: SMA female
  • Open PLC
  • Power supply via USB 2.0 Male A - Male B cable (printer cable not included)
  • Compatible with SDR : SDR Uno (recommended for Windows), HDSDR, SDR Console, CubicSDR (Mac/Linux) and SDRConnect (Windows, Linux, Mac)
  • Power consumption: 120-175mA (without BIAS-T enabled)
  • Minimum recommended Windows PC configuration: Intel Core i3, 4GB memory
  • Weight: 200g
  • Dimensions: 99x88x36mm
  • 2-year warranty and CE standards


Online installation and configuration

You will find an online guide for quick installation of the RSP1B: http://www.sdrplay.com/start-here/

To download the latest SDRPlay drivers and software for Windows, Mac, Linux (Ubuntu & Debian): http://www.sdrplay.com/downloads/

Recommendations for use

1 - Do not connect the SDR receiver directly to the same aerial as your transmitter, or to an aerial in the near field of a transmitting aerial, or switch to transmission and transmit signals close to the RSP, as this may cause irreversible damage.

2 - It is strongly recommended that you disconnect the antenna during stormy weather and ensure that the antenna is earthed. Finally, before reconnecting the coaxial cable after a storm, it must be discharged (braid and core) by earthing it.

In these 2 cases of loss of reception and RF damage, the warranty will not apply and the equipment will not be repaired, exchanged or refunded. Signs of RF damage are characterised by signs of heat on or around components close to the signal input, a burning smell is also an indication of RF damage.

SDRPlay support request

For any technical support request, SDRPlay offers an online platform to get in touch directly with the technical support team for our customers.

Although the interface is in English, it is possible to leave your message in French: Official SDRPlay support request.

A Facebook group, independent of SDRPlay and Passion Radio, also offers help in French: FB Group SDRPlay France.

  • Pigtail SMA Male to BNC Male Passion Radio SMA PIGTAIL-SMA-M-BNC-M-78
    5,30 € 5,58 € tax excl. -5%tax excl. In stock

    -5%

    Reference: PIGTAIL-SMA-M-BNC-M-15CM-78

    Pigtail SMA Male to BNC Male RG-316 50 ohms

    Pigtail cable with BNC Male - SMA Male connector and RG-316 50 ohm coaxial cable for use in frequencies from 0 to 3000Mhz. Available in different lengths: 15cm, 30cm or 50cm Connector 1: BNC

    5,30 €

    5,58 €

    Reduced price!
  • Pigtail SMA Male UHF Female 15/50/100cm Passion Radio SMA PIGTAIL-SMA-M-UHF-F-80
    4,67 € 4,92 € tax excl. -5%tax excl. In stock

    -5%

    Reference: PIGTAIL-SMA-M-UHF-F-80

    Pigtail SMA Male UHF Female 15/50/100cm RG316

    Adapter cable pigtail SMA Male to plug UHF Female. RG 316 50 ohm coaxial cable. Available in 3 lengths: 15, 50 and 100 cm.

    4,67 €

    4,92 €

    Reduced price!
  • Pigtail SMA Male - SMA Male 15/50/100cm Passion Radio SMA PIGTAIL-SMA-M-81
    3,96 € 4,17 € tax excl. -5%tax excl. In stock

    -5%

    Reference: PIGTAIL-SMA-M-SMA-M-81

    Pigtail SMA Male - SMA Male 15/30/50/100cm RG316

    SMA Male to SMA Male pigtail adapter, for connecting a card, for example converter Ham it upconverter card to the SDR transceiver HackRF One SDR transceiver, or the SDRPlay broadband receiverwideband

    3,96 €

    4,17 €

    Reduced price!
  • Pigtail SMA Male to BNC Female Passion Radio SMA PIGTAIL-SMA-M-BNC-F-83
    6,25 € 6,58 € tax excl. -5%tax excl. In stock

    -5%

    Reference: PIGTAIL-SMA-M-BNC-F-83

    Pigtail SMA Male to BNC Female 15cm RG316

    SMA Male to BNC Female pigtail adapter. RG 316 50 ohm coaxial cable, approx. 15 cm long.

    6,25 €

    6,58 €

    Reduced price!

Reviews

Click here to leave a review

Additional or similar equipment

  • Pigtail SMA Male to BNC Male RG-316 50 ohms

    Pigtail cable with BNC Male - SMA Male connector and RG-316 50 ohm coaxial cable for use in frequencies from 0 to 3000Mhz. Available in different lengths: 15cm, 30cm or 50cm Connector 1: BNC

    5,30 € tax incl.

    5,30 €tax excl.

    5,58 € -5%
    In stock
  • Pigtail SMA Male UHF Female 15/50/100cm RG316

    Adapter cable pigtail SMA Male to plug UHF Female. RG 316 50 ohm coaxial cable. Available in 3 lengths: 15, 50 and 100 cm.

    4,67 € tax incl.

    4,67 €tax excl.

    4,92 € -5%
    In stock
  • Pigtail SMA Male - SMA Male 15/30/50/100cm RG316

    SMA Male to SMA Male pigtail adapter, for connecting a card, for example converter Ham it upconverter card to the SDR transceiver HackRF One SDR transceiver, or the SDRPlay broadband receiverwideband

    3,96 € tax incl.

    3,96 €tax excl.

    4,17 € -5%
    In stock
  • Pigtail SMA Male to BNC Female 15cm RG316

    SMA Male to BNC Female pigtail adapter. RG 316 50 ohm coaxial cable, approx. 15 cm long.

    6,25 € tax incl.

    6,25 €tax excl.

    6,58 € -5%
    In stock
  • Active 0-50 Mhz mini antenna for SDR receiver

    This Mini-Whip SDR active mini-antenna enables reception of HF frequencies from 0 to 50 mhz with an SDR receiver. Compact in size, the Mini-Whip active antenna can be used as a stand-alone device

    20,50 € tax incl.

    20,50 €tax excl.

    21,58 € -5%
    In stock
  • Adapter SMA Male

    This RF adapter is fitted with a male SMA connector on both sides. It can be used to connect 2 SMA female cables or connectors, for example.

    3,56 € tax incl.

    3,56 €tax excl.

    3,75 € -5%
    In stock
  • HF Antenna Balun 1:9 for SDR

    This balun is the perfect accessory to connect a long wire antenna, for example with the converter HF SDR Ham it Up to listen shortwave and HF bands from 0.5 to 30Mhz, but this balun can work up to

    14,93 € tax incl.

    14,93 €tax excl.

    15,72 € -5%
    In stock
  • KSR195 Low Loss Coaxial Cable Extension with 2X SMA Male

    SMA Male to SMA Male cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6Ghz. Available lengths: 0.5m (50cm), 1, 3 or 5 metresConnector 1: SMA MaleConnector 2: SMA Male

    7,05 € tax incl.

    7,05 €tax excl.

    7,42 € -5%
    In stock
  • RSP1A SDRPlay receiver 1 kHz to 2 GHz 14-bit + LNA

    New version of the SDRPlay wideband receiver, the RSP1A now covers all frequencies from 1 kHz to 2 GHz without hole, all modes, with up to 10 MHz bandwidth on the screen and 14-bit sampling. In

    106,50 € tax incl.

    106,50 €tax excl.

    112,50 €
    In stock
  • SDRPlay RSPduo 1KHz to 2GHz Double Tuner 14 Bit

    The new SDRPlay RSPduo is a 14-bit SDR dual receiver that covers from 1kHz to 2GHz (without hole), with dual-tuner (simultaneous reception on 2 different antennas). The SDRDuo is equipped with a

    236,71 € tax incl.

    236,71 €tax excl.

    249,17 € -5%
    Out of stock, available within 1 to 2 months
  • Discone antenna SIRIO SD-1300 RX 25-1300 Mhz & TX VHF-UHF

    Discone antenna SIRIO SD 1300 N (with N plug) or SD1300U (with UHF female connector - SO-239), wide-bande in reception from 25 to 1300 Mhz and the radio amateur bands in emission on 50Mhz, 144Mhz,

    94,21 € tax incl.

    94,21 €tax excl.

    99,17 € -5%
    Out of stock, available in 3-4 weeks
  • DIAMOND X50 & X-50N Antenna 144/430Mhz

    Dual-band Diamond antenna X50 144/430MHz (2m/70cm). Type:6/8 wave (144MHz), 3x 5/8 wave C-Load radialless (430MHz)Length: 1.7mWeight: 0.9kg Gain: 4.5dB (144MHz), 7.2dBi (430MHz) Max.power:

    62,54 € tax incl.

    62,54 €tax excl.

    65,83 € -5%
    Out of stock, available in 2 to 3 months
  • USB 2.0 Quality Printer cable / Ham it Up / SDRPlay

    Hi-Quality USB 2.0 Vention print cable Male A - Male B, high-speed.This cable is used to power a printer or scanner, as well as Upconverter HF Ham it up, SDR receiver SDRPlay: RSP1A, RSPdx or

    10,75 € tax incl.

    10,75 €tax excl.

    In stock
  • Nooelec Balun 1:9 V2 for HF SDR reception 0-30Mhz

    The new version Nooelec Balun 1:9 v2 allows to add a wired or dipole antenna type to listen HF bands from 0 to 30Mhz from the Ham It Up converter, an SDRPlay receiver or equivalent covering the HF

    19,23 € tax incl.

    19,23 €tax excl.

    20,24 € -5%
    In stock
  • SDRPlay RSPdx 1KHz - 2GHz 14-bit LNA metal case & 3 antenna ports

    The new SDRPlay RSPdx receiver is the replacement of the RSP2PRO, it covers from 1kHz to 2GHz (without hole) with 10MHz of the spectrum on the screen, 14-bit sampling, with TCXO 0.5PPM, notch filter

    189,21 € tax incl.

    189,21 €tax excl.

    199,17 € -5%
    In stock
  • Active Loop antenna MLA-30 Plus MegaLoop 500 Khz - 30 Mhz

    MLA-30 Plus magnetic loop active antenna for receiving HF bands from 500 kHz to 30 MHz.The MLA-30+ antenna can be used with the RTL-SDR V3 stick in direct conversion mode, with the Ham it up

    39,50 € tax incl.

    39,50 €tax excl.

    41,58 € -5%
    In stock
  • Super Discone Antenna 100-1500Mhz Diamond D-190 + cable

    Super Discone Diamond D-190 antenna, for fixed installation on a mast, allows to receive from 100 MHz to 1500 MHz and to transmit on 144/430/904 and 1200 MHz.Length: 0.84mWeight: 0.52 kgRadian

    78,38 € tax incl.

    78,38 €tax excl.

    82,50 € -5%
    In stock
  • Super Discone Antenna 50-1500Mhz Diamond D-150 + cable

    Super Discone Diamond D-150 antenna, for fixed installation on a mast, allows to receive from 50 MHz to 1500 MHz and to transmit on 50/144/430/904 and 1200 MHz.Length: 1.04mWeight: 0.62 kgRadian

    98,17 € tax incl.

    98,17 €tax excl.

    103,33 € -5%
    In stock
  • Deluxe Plus Passion Radio SDR Pack V4 with TCXO

    The Passion Radio SDR Deluxe Plus V4 pack provides reception coverage between 0.5 to 1766 MHz from a computer running Windows, Mac or Linux.This V4 version of the pack includes:- 1 RTL-SDR.com V3

    132,50 € tax incl.

    132,50 €tax excl.

    In stock
  • CHELEGANCE GA-450 Active indoor shortwave 0.5-30 MHz loop antenna for SDR

    Shortwave active loop antenna with frequency coverage 2.3-30MHz, for reception only.Frequency range:SW 2.3-30MHz MW 522-1710KhzImpedance: 50 ohms Antenna gain: 20dbi Ring diameter: 20cm

    78,38 € tax incl.

    78,38 €tax excl.

    82,50 € -5%
    In stock
  • Balun One Nine v2 HF 9:1 Nooelec with aluminium housing

    Small 9:1 balun/unun (38 mm x 25.0 mm) designed to connect long wires and HF dipole antennas to your SDR HF radio, radio or Ham It Up HF upconverter. Assembled in a bespoke aluminium housing, it

    25,65 € tax incl.

    25,65 €tax excl.

    27,00 € -5%
    In stock
  • Nooelec VeGA variable gain amplifier LNA module Barebones 30MHz-4000MHz

    The VeGA Barebones is a 30MHz to 4000MHz broadband linear LNA module designed to allow the user to control the level of amplification to achieve the best signal-to-noise ratio (SNR). The device can be

    67,77 € tax incl.

    67,77 €tax excl.

    71,34 € -5%
    Out of stock, available in 2 to 3 weeks
  • Downconverter 1.55 GHz to 3.1 GHz Nooelec Ham It Down with TCXO Bias-Tee

    The Ham It Down is a downconverter capable of converting radio signals from 1.55 GHz to 3.1 GHz in the 50 MHz - 1.6 GHz frequency range and supported by SDR keys such as NESDR and RTL-SDR V3. It

    101,69 € tax incl.

    101,69 €tax excl.

    107,04 € -5%
    In stock
  • Pack Passion SDR portable radio V5 with HF VHF UHF antenna

    The Passion Radio SDR Portable V5 pack provides reception coverage between 0.1 and 1750 MHz (without holes) from a Windows, Mac or Linux computer, for fixed or mobile use with a laptop. This V5

    157,50 € tax incl.

    157,50 €tax excl.

    Out of stock, available within 4 weeks

Delivery Europe & Overseas

Stock and shipped from France

Product return

14 days to return, 2 warranty

Email support

Response within 24h to 72h

Secure payment

SSL, VISA, Mastercard, Paypal

Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.