No products
New products
-
Tactical Microphone Headset for PMR-171 & TBR-119 with Noise Reduction
99,89 € tax excl. -
-
GUO GH-V5 HF VHF UHF 7MHz-430MHz 500W Portable Dipole Antenna
178,22 € tax excl. -
Viewed products
-
RF attenuator SMA 0-6...
This adaptor is an SMA male attenuator...
-
Magnetic Base 6cm for antennas with BNC male connector
22,21 € -10% 24,68 €
Antenna mounting
Selection of fasteners, hooks, turnbuckles, mast supports, cable clamps for antennas or guy wires and accessories for wire antennas and their construction.
60,23 € 66,92 € tax excl. -10%tax excl. In stock-10%
Reference: SIRIO-M3-2804
SIRIO M-3 antenna support
M-3 base antenna support. Double position. Compatible with masts 35 to 42 mm in diameter. Includes brackets and screws. Can also be wall-mounted using 2 screw anchors (not included). Made of 3 mm Ø
60,23 €66,92 €
Reduced price!Reference: WINDCAMP-GIPSY-BALUN-3047
WINDCAMP Gipsy 1:1 High performance balun 3-55MHz
High-performance 1:1 voltage balun specially designed for amateur radio antennas. This compact, lightweight balun ensures a perfect impedance match between your transceiver and your antenna over the
44,84 €
39,68 €Reference: GUOHETEC-Feeder-10M-3165
10m Coaxial Cable PL-259 to BNC Male for Yagi DP200 and GH-V5 Antennas
The GH-S180 is a high-quality 10-meter coaxial cable designed by Guohe Electronics to ensure the connection between your radio transceiver and your antenna system. It is specifically optimized for
39,68 €Reference: WIND-RC2-BNC-3066
WINDCAMP RC-2 BNC connector antenna support for ICOM IC-705
The RC-2 BNC version is a compact antenna support designed for the ICOM IC-705 QRP transceiver and for use with an antenna with a BNC connector. The vertical angle is adjustable, and the ARK-705
32,90 €
32,09 €Reference: MOON-09-190-PTM38-2261
Moonraker PTM-38 mast clamp for antenna whip with 3/8th thread
Clamp for 3/8th antenna whip. Moonraker PTM-38 mast clamp for antenna whip with 3/8th thread.Connector: 3/8th female connector Connection: SO239 Mast: Suitable up to 51 mm (2") Size: 10 x 10cm
32,09 €
31,15 €Reference: CHELEGANCE-CNtoU-MAT50-3087
CNtoU MAT-50 Magnetic ground plane for HF/VHF/UHF antennas
The CNtoU MAT-50 is a magnetic ground plane mat designed to improve the earthing of vehicle-mounted antennas, particularly HF antennas with magnetic bases. By fixing to the roof or any metal part of
31,15 €
27,90 €Reference: MOON-09-187-PULLEY2-2104
Pulley-2 Moonraker heavy-duty pulley wheel
Heavy-duty pulley wheel, perfect for long wires, G5RVs, etc. Key features/specifications:Mast: Fits a mast up to 51 mm (2 inches) Wire: Up to 6 mm steel wire or nylon rope
27,90 €
27,87 €Reference: AA-SUPPORT-RA-2820
Horizontal vertical polarisation support for directive Antennas Amplifiers
This bracket allows you to change the horizontal <> vertical polarisation of a directional antenna from Antennas Amplifiers. Available in 2 sizes for 20mm or 30mm boom.
27,87 €Reference: MOON-09-192-PTMS-2108
PTM-S Mast clamp designed for PL259 Moonraker mobile antennas
Clamp for mobile antennas Main features/specifications :Fitting: SO239 base Connection: SO239 Mast: Suitable up to 51mm (2") Size: 10 x 10cm Complete with earthing label for connection of earth wire
25,08 €29,50 €
24,96 €Reference: MASTRANT-KIT-MA2-3P-65MM-1942
Lightweight 3-point rigging kit for 26 to 52 mm mast
Lightweight, 3-point anchor kit in Mastrant MA2 stainless steel, for 26-52 mm mast.Very strong and durable Thickness: 2.5 mm Height: 25 mm Length: 65 mm Screws: M6 stainless steel screws, nuts and
24,96 €
24,90 €Reference: ARROW-M-BII-1702
M/BII mounting bracket for portable Arrow Antenna II
Mounting bracket for Arrow II portable and satellite antennas and booms of about 1.9cm.
24,90 €
23,04 €Reference: MASTRANT-PACK-MA1-3P-100MM-1941
Universal heavy 3-point guying kit for masts from 15 to 102 mm
Mastrant MA1 universal support kit with 3 anchor points for guy wires to be fixed on a mast from 15 to 102mm, including clamps and screws 100mm for 3 anchor points.Very strong Thickness 4 mm M8
23,04 €
22,63 €Reference: MASTRANT-PACK-MA1-3P-60MM-1939
Universal heavy 3-point guying kit for masts from 15 to 53 mm
Mastrant MA1 heavy universal support kit with 3 anchor points for guy wires to be fixed on a mast from 15 to 53mm, including flanges and 60mm screws for 3 anchor points.Very strong Thickness 4 mm M8
22,63 €
20,56 €Reference: MASTRANT-KIT-MA2-3P-40MM-1940
Lightweight 3-point rigging kit for 10 to 34 mm mast
Lightweight, 3-point anchor kit in Mastrant MA2 stainless steel, for 10-34 mm mast.Very strong and durable Thickness: 2.5 mm Height: 25 mm Length: 40 mm Screws: M6 stainless steel screws, nuts and
20,56 €
19,90 €Reference: DIAMOND-SUPPORT-DPKCR-1889
Steel antenna mounting bracket - DIAMOND DPK-CR
Stainless steel mounting bracket to install a mobile or portable type antenna on a mast from 15 to 33mm. Accepted mast diameter: 15mm to 32mmSize: 85 x 60 mm The mounting base is not included, our
19,90 €
18,63 € 21,92 € tax excl. -15%tax excl. Material no longer available-15%
Reference: SIGMA-322495321077-2301
Dipole centre with N-type connector for 3/8" threaded antenna lead
Dipole centre with N-type connector for antennas and leads with 3/8" thread.Type: dipole centre with 3/8" radial connectors Connector: N Female +" symbol for radiating element E symbol for earthing
18,63 €21,92 €
Reduced price!
18,23 €Reference: SIRIO-FT4-2802
SIRIO FT-4 angled antenna support
Antenna bracket angled at 90º for wall mounting. Tube section 38 mm in diameter. It has two 9 mm diameter holes for two lag bolts. There is a third hole in the lower part of the tube to accommodate
18,23 €
15,70 € 19,62 € tax excl. -20%tax excl. Material no longer available-20%
Reference: SIGMA-136147-2401
Dipole centre with SO239 type connector for 3/8" threaded antenna leads
Dipole centre with SO239 type connector (UHF female) for antennas and leads with 3/8 thread.Type: dipole centre with 3/8" radial connectors Connector: SO239 (UHF Female) +" symbol for radiating
15,70 €19,62 €
Reduced price!
14,08 €Reference: SIRIO-M2-2805
SIRIO M-2 L-shaped antenna support
Antenna support in L format. The antenna can be fixed on both sides. Allows two positions. Compatible with nautical and land installations. Made of stainless steel.
14,08 €Reference: MASTRANT-TJJ-ASHF10-1934
Stainless steel clevis turnbuckle for 10 or 12 mm diameter guy rope
Stainless steel turnbuckle for guy ropes, diameter 10 or 12 mm (to be selected below). The working load (SWL) for turnbuckles is the maximum load during a length change. For the calculation of the
13,73 €17,16 €
13,50 €Reference: CHELEGANCE-CH0020012-2975
Set of 3/8-24 female to M10 male and 3/8x24 male to M10 female antenna adapters
Set of 3/8-24 female to M10 male and 3/8-24 male to M10 female antenna adapters. Can be used to connect a 3/8-24 female connector to an M10 male connector and to connect a 3/8-24 male connector to an
13,50 €
12,00 €Reference: MOON-09-199-DIPOLE-2101
DPC-SX High resistance dipole centre with SO239 for wire antenna
DPC-SX High resistance dipole centre with SO239 for wire antenna construction.
12,00 €
11,53 €Reference: SIRIO-FT5-2803
SIRIO FT-5 antenna support
Basic antenna support. Made of high-quality aluminium with stainless steel screws and clamps. Compatible with SPO, GPF and similar antennas. For masts from 25 to 55 mm in diameter. Consists of two
11,53 €11,53 €
9,90 €Reference: MOON-09-139-PTP20S-2137
PTP-20S universal mast balcony & pole antenna mount Nut Pole To Pole Clamp
Universal pole-to-pole or balcony mount designed for antennas with 31 to 51mm masts.
9,90 €
8,51 €Reference: MASTRANT-CAT-CL828-63 -1923
Black aero cleat tensioner with blocker for 3 to 4 mm rope
Black aero cleat tensioner with blocker for 3 to 4 mm diameter rope UV stabilised nylon. The Clamcleat® CL828-70 cleat is made of Micros Aero alloy and has a rigging spout with a 4:1 ratio. The
8,51 €
8,50 €Reference: MOON-09-163-DIPOLE-2260
Moonraker DPC-S right dipole centre with SO239 for wire antenna
Moonraker DPC-S straight dipole centre with SO239 for building wire antennas in the HF and VHF bands.Connector: SO239 (UHF female) Power : 500W
8,50 €
7,50 €Reference: MOON-09-162-DIPOLE-2100
DPC-W Centre for dipole and antenna G5RV twin lead 300 or 450 OHMS Moonraker
DPC-W Centre for dipole and antenna construction G5RV twin lead 300 or 450 OHMS. Connection: Direct open feed for a 300 or 450 ohm twin lead.
7,50 €
6,72 €Reference: MASTRANT-BRACKET-ACM2-1932
Support for the MA2 hoisting mast
Mastrant MA2 stainless steel universal mast fixing kit bracket.Very strong and durable (AISI 316 stainless steel screws, nuts and washers, AISI 304 brackets). Holds the mast at 6 or 8 points.The
6,72 €
4,71 €Reference: MASTRANT-TEE-ASHE06-1918
Tensioner for guy wires with double eyelet diameter 10 to 16 mm
Tensioner for guy ropes with double eyelet (diameter 10 to 16 mm) in stainless steel for easy installation. For the calculation of the maximum static load, we recommend 30% of the breaking load (BS).
4,71 €
4,71 €Reference: MASTRANT-TEH-ASHH06-1919
Tensioner for guy rope with hook and eyelet diameter 10 to 16 mm
Tensioner for guy wires with hook and eye (diameter from 10 to 16 mm) in stainless steel for easy assembly.Strength: 1100 daN, ~kg Working load 80 daN, ~kg
4,71 €
4,11 €Reference: MASTRANT-CLT-CL223-1922
Loop tensioner black cleat for 3 to 6 mm rope
Clamcleat loop tensioner for rope diameters from 3 mm (1/8") to 6 mm (1/4"). Black colour. UV stabilised nylon.Attached to a rope, the CL223 is quick to tension, easy to adjust and easy to release.
4,11 €
2,90 €Reference: MOON-09-178-VB25V-2112
VBOLT-25 V-bolt with nuts for poles and masts
Can be used with our TMA-2 telescopic masts and TMF-1.5/2/3 GRP versions. This V-bolt also fits all our TandK supports and stands, except the SO-6. Key features/specifications:Type: 65mm (2.5")
2,90 €
2,49 €Reference: MASTRANT-HOOK-AHO05-1915
5-8 mm spring hook carabiner for guy rope
Single stainless steel carabiner for attaching a steel guy rope or a guy rope.Strength: 400 daN, ~kg Working load 120 daN, ~kg From 5mm to 8mm
2,49 €
2,49 €Reference: MASTRANT-CHAIN-ACC04-1916
4 to 8 mm screw link for shrouds
Screw link in stainless steel for the realization of fixed connections with high load.Strength: 500 daN, ~kg Working load 150 daN, ~kg
2,49 €
2,40 €Reference: MASTRANT-BOLT-AES061-1935
Screw-in rod ring with a diameter of 6 to 10 mm
Stainless steel threaded rod ring 6 to 10 mm in diameter (to be selected below)Strength: 1420 daN, ~kg Working load 240 daN, ~kg
2,40 €
2,34 €Reference: MASTRANT-SHACKLE-ASE05-1917
5 to 10 mm straight shackle for shackling
Stainless steel shackle for shroud attachment. Its locking pin allows a perfectly safe use, avoiding any accidental unscrewing.Strength: 900 daN, ~kg Working load 270 daN, ~kg
2,34 €
1,95 €Reference: MOON-09-157-L-INSUL-2133
Dog bone Large insulator
Large black ribbed insulator Size: 11cmX 3.5cm
1,95 €
1,90 €Reference: MOON-09-180-VB20V-2110
VBOLT-20 V bolt with nuts for poles and mastsMoonraker
51mm (2") 3/8th thread heavy duty V-bolt Size: Fits 31-51mm (1.25-2.5") poles or masts
1,90 €
1,80 €Reference: MASTRANT-CLIP-ADC03-1911
Duplex steel cable clip 3 to 10 mm for guy wires
Cable clamp (duplex clip) prevents spontaneous loosening, strong counter-pressure due to the elasticity of the ropes. The 2 nuts allow for easy loosening for adjustments. To be used with a heart lug
1,80 €
1,80 €Reference: MASTRANT-GRIP-ASC03-1912
Stainless steel cable clamp for 3 to 10 mm guy wires
Stainless steel cable clamp for guy wires, easy to install thanks to the long threaded section. For optimal hold, we recommend using 3 cable ties and a heart-shaped lug per fixing point.
1,80 €
1,20 €Reference: MOON-09-156-S-INSUL-2119
Small insulating dog bone
Standard black ribbed insulation Size: 7X 2.5cm
1,20 €
1,00 €Reference: MOON-09-182-VB15V-2111
VBOLT-15 V-bolt with nuts for poles and masts
37 mm (1.5") V-bolt with 8 mm thread for heavy-duty use Size: to fit 25-37mm (1-1.5") poles or masts
1,00 €
0,90 € 1,79 € tax excl. -50%tax excl. In stock-50%
Reference: MASTRANT-NUT-AEN06-1936
Ring with threaded nut, diameter 6 to 12 mm
Stainless steel threaded nut ring 6 to 12 mm diameter (to be selected below)Strength: 780 daN, ~kg Working load 130 daN, ~kg
0,90 €1,79 €
Reduced price!
0,88 €Reference: MASTRANT-MAST-ACM1S06-1931
60 mm or 100 mm screw set for MA1 guy pole attachment
Stainless steel screw set for MA1 guy pole attachment. Screws available in 60mm or 100mm, please select below.
0,88 €
0,80 €Reference: MASTRANT-MAST-ACM2S04-1933
Screw set 40 mm or 65 mm for MA2 guy pole attachment
Stainless steel screw set for MA2 guy pole attachment. Screws available in 40mm or 65mm, please select below.
0,80 €
0,57 €Reference: MASTRANT-CLL-CL266-1920
Single black rope tensioner for ropes from 1 to 8 mm
Clamcleat® Line-Lok® rope clamps offer superior performance compared to traditional guy wires. Designed to prevent rope slippage while being easily released, they are ideal for antenna masts, wire
0,57 €
0,50 €Reference: MASTRANT-GRIPZN-ASCZ05-1913
5 or 10 mm galvanised steel cable clamp for bracing
Cable clamp made of galvanised steel (zinc coated) for bracing. For optimal support, we recommend 3 cable ties and a heart-shaped lug per fixing point.
0,50 €
0,40 € 0,80 € tax excl. -50%tax excl. In stock-50%
Reference: MASTRANT-FEROV-ACF03-1914
Aluminium ferrule oval sleeve for 3 to 8 mm bracing
Aluminium sleeve for guy rope, used to form a loop with the rope and the core lug, thus reducing the breaking load of the rope by 10%.
0,40 €0,80 €
Reduced price!
Europe & Overseas
Shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2026 - Passion Radio / 4 MY PEOPLE
Les photos et coloris ne sont pas contractuels.