The new Anytone AT-D878UV is a VHF and UHF dual-band walkie-talkie, FM and DMR digital analog, Tier I & II compatible, Motorbro and Hytera, TDMA (2 TimeSlot), VFO button, GPS with APRS FM and DMR , Roaming function, 3100mAh battery and bluetooth in option.
Comes complete with: 1 ANYTONE AT-D878-UV with GPS (bluetooth optional with BT PTT button included), 1 desktop charger 120V-240V (EU plug), 1 waterproof battery (Li-ion 7.2V 3100mAh), 1 dual band VHF / UHF antenna, 1 belt clip , manual in English. 2 year warranty and programming cable included.
This radio is sold non-programmed, neither in frequencies and without codeplug. Programming is to be done by the user, see more below.
2 Timeslot, TDMA, compatible MOTOTRBO Tier I & II
Power: 6W / 2.5W / 0.5W
RX and TX frequency (amateur radio version): 144-146 MHz and 430-440 MHz
RX and TX frequency (export version): 136-174 MHz and 400-480 MHz
Auto-detection digital or analog mode
4000 channels, 10000 Talkgroup and 150000 Contacts
VFO button function to change frequencies
APRS function in FM or DMR
TFT color LCD display, dual display, dual standby
Bandwidth: 12.5 K / 25 K (analog); 12.5K (DMR)
No frequency: 5Khz, 6.25Khz
Coding and decoding CTCSS / DCS
DTMF / 2TONE / 5TONE / Tone 1750Hz
Up to 5 different DMR IDs
Icon indicator or voice prompt when connecting with a relay
Roaming function (selection of an accessible relay in a predefined list)
SMS function via the keyboard
ANI function, PTT ID, VOX
Male SMA antenna connector
Emergency alarm (with GPS data transmission)
KENWOOD microphone / headphone jack
Antenna connector: SMA Male (compatible antenna SMA female)
Battery: 3100mAh battery
CE and FCC certified
2 years warranty by Passion Radio
Find the latest versions CPS and firmware update for the Anytone AT-D878UV in the download area below or at OPEN-DMR - AT-878UV.
To activate the VFO mode via the P2 key as well as the additional menus, here is how to proceed:
Go to the "Optional Settings" menu, then in the "Other" menu then in the "choose working mode" drop-down menu, select "amateur mode", so the modifications are applied, rewrite the codeplug on the radio.
The Anytone AT-D878UV is equipped with the new roaming function that allows, when roaming, the walkie-talkie to automatically switch to a pre-defined relay in a list.
The romaing function of the D878UV can be triggered manually or via a timer allowing the radio to switch to the loudest relay.
Note that the D878UV does not use the GPS position to locate the relays around it, they must be previously registered in the walkie-talkie.
Reminder: The use of the Anytone AT-D878-UV walkie-talkie is subject to license and to the respect by the user of the frequencies and the legislation in force in his country.
This radio is sold non-programmed, neither in frequencies and without codeplug. Programming is to be done by the user.
Passion Radio no longer provides support for amateur radio DMR programming given too many DMR networks which some are incompatible with each other.
It is the responsibility of the administrators of the DMR networks to provide ready-to-use codeplugs for the users of their networks.
CPS programming software v1.20P for Anytone AT-878UV with firmware 1.20P.
KD0PNC programming guide 1.26 in french for the Anytone AT-868UV and AT-D878UV, translated by VE2RI.
Operating instructions for the PTT Bluetooth button included on the D878UV PLUS version
Anytone CPS software, drivers and firmware v1.19, June 2020
Increase hightly performance of Dualband Baofeng or wideband scanner, with the antenna Diamond SRJ77CA for 2m/70cm (144/430mhz), 39cm long, and receiving from 120 to 900 MHz. Work also for VHF marine
This Nagoya for walkie-talkie antenna with SMA Male connector allows to increase performance on the 144 and 430MHz bands with 39cm long and equipped with SMA female connector. SMA Female antenna is
Resistant fabric case, made in the United States, to carry a walkie-talkie on the belt. Available in 5 different sizes to suit all brands and models of walkie-talkie as for example: Icom, Kenwood,
The Nano Hotspot is supplied assembled and tested before sending, it allows to have a digital access point MMDVM like: D-Star, DMR, C4FM, P25, NXDN & POCSAG for UHF 430-440Mhz amateur radio band.
The new Anytone AT-D868UV v2 is a 144/430Mhz dual-band walkie-talkie, DM analog and digital DMR, Tier I & II compatible, Motorbro and Hytera, TDMA (2 TimeSlot), with VFO, GPS and high capacity
The VERO VR-P25D is a VHF 136-174 Mhz or UHF 400-470Mhz mobile amplifier for FM analog and digital DMR (Tier I & II), D-STAR, C4FM, P25, NXDN and dPMR. TDMA compatible (2 TimeSlot) and FDMA.
Anytone official cigarette lighter 12V power cable compatible with the Anytone AT-D868UV and AT-D878UV DMR digital radio walkie-talkie.It is a cable that powers the charging base of Anytone AT-D868 UV
Anytone official battery-eliminator for car and Anytone AT-D868UV or AT-D878UV DMR digital mobile radio.It is a cable that powers the Anytone AT-D868 or D878 UV walkie talkie directly from a 12V
Genuine Anytone QB44HL battery, high capacity 3100mAh, for DMR walkie-talkie Anytone AT-D868UV or AT-D878UV.Our Anytone batteries come with a free belt clip.Comes with: Anytone Original Battery QB44HL
Leather case to protect and carry the portable digital radio DMR Anytone AT-D868UV and AT-D878UV. Comes with: 1 official Anytone PT-878 leather case.
Programming USB cable genuine Anytone for walkie-talkie DMR Anytone AT-D868UV and AT-D878UV. Comes with : 1 genuine Anytone PC-04 USB cable without CD (software and drivers to download below).
AC Power charger adapter for Anytone AT-D868UV and AT-D878UV DMR digital radio walkie-talkie. Comes with: 1 Anytone QBC-45L desktop base and 1 charger 220V Anytone QPS-17 with European plug.
Hand microphone, genuine ANYTONE for Anytone AT-D868-UV and AT-D878-UV DMR walkie-talkie. Equipped with a 3.5mm jack for mono headphones. Comes with: 1 Original Anytone Micro Warranty for AT-D868-UV
The Anytone AT-D578UV mobile is the first mobile DMR with a VFO, it covers the 144 and 430Mhz bands (VHF and UHF dual band), analog FM and digital DMR, Tier I & II compatible, Motorbro and Hytera,
BI7JTA's Raspberry Pi duplex MMDVM hotspot is a multimode digital access point: D-Star, DMR, C4FM, P25, POCSAG and NXDN, for the amateur radio bands VHF 144-148Mhz and UHF 430-450Mhz, with 10mW
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal