POTY dual band feed antenna 2.4 Ghz & 10 Ghz for QO100

The POTY / Patch of the Year is a 2.4/10 Ghz dual-band patch antenna, circular polarized 2400 MHz TX and linear horn antenna 10500 MHz RX with dielectric lens (new cylindrical version for offset dish f/D 0.6) and QO-100 satellite / Es'hail2.

It is a kit antenna to assemble (see info below).

Amateur radio design: G0MJW, PA3FYM and M0EYT
Amateur radio manufacturing: PE1CKK

Delivered with: 1 dielectric lens (new cylindrical version), 1 correction plate, 1 reflector, 1 SMA female SMA connector, 2 M2.5 screws and 1 waveguide. Antenna kit to assemble.

Average grade

Read user reviews (2) Write your review

Customers who bought this product also bought:

LNB assembly on the POTY antenna

The quickest and easiest way to mount the POTY antenna on the LNB is to drill a 22mm hole in the plastic cap in front of the LNB and push the POTY waveguide inside.

drill lnb poty 2.4Ghz 10Ghz

Push the POTY until it meets the metal horn inside the LNB. By rotating the POTY, you get the flex out of the cap and the waveguide stays in position.

With silicone sealant, the LNB head will be fixed and waterproof. The mounting on the support of the dish is to be done just before the reflector patch, on the tube of the POTY and not on the LNB.

assembling poty lnb 22mm

N Connector usage

It is possible to replace the supplied SMA connector with an N-type connector.

There are 2 additional holes on the reflector plate to fit a female N-type connector with a flat base (the model of connector N which we have in shop is not suitable for mounting on the antenna patch):

The connector is fixed with M2.5 screws. The insulation of the connector must be shortened to 4 mm:

Lens assembly

It may happen that insertion of the lens into the tube can be difficult because some lenses may have a slightly larger diameter or if the tube have a tolerance on the lower side.

The manufacturer recommends in this case to place the lens in the freezer for 1 hour to facilitate insertion.

New lens version

A new version of the lens is available and for better performance on a 60cm antenna.

Download

POTY antenna doc Documentation of dual band antenna for QO-100 Es'Hail2
POTY assembly manual
POTY assembly manual (FR) In french.
POTY antenna VNA VNA measurement of the POTY antenna 2.4Ghz uplink by F4ASS
Radiation pattern POTY Radiation pattern, aperture angle of the POTY antenna.
Assembly instructions POTY (FR) POTY antenna mounting manual for the Oscar 100 satellite (QO-100) by F4EGG.

Accessories

UpConverter 2400Mhz V2.0 for QO-100 - DXpatrol
The CT1FFU DXPatrol transverter MK2 (v2.0) for QO-100 , allows to transmit from a HF, VHF or UHF radio from 28/144/432/1296 Mhz to 2400Mhz (13cm) on the QO-100
125,00 € VAT Inc.
104.17 VAT Exc. Add to cart
Satellite LNB Inverto PLL Single Black / QO-100
Inverto LNB Single Series Black Premium, universal satellite receiver, with a gain up to 65dB and a low noise factor of 0.2dB. Compatible with all major satellites and
8,90 € VAT Inc.
7.42 VAT Exc. Add to cart
Camping Satellite Dish Antenna 35cm + Suitcase
Dish antenna 35cm PremiumX PX35 with carrying case and mounting, for use in camping, mobile or fixed from a balcony. The PX35 camping satellite antenna is easy to
44,90 € VAT Inc.
37.42 VAT Exc. Add to cart
LNBF PLL Avenger 0.1dB for Ku Band Satellite & QO1
High quality Avenger PLL321S-2 Universal Receiver Head, with 1 F-Type output, 55dB gain (60dB conversion), 0.1dB noise factor, and +/- 300Khz stability reception. LNBF
7,90 € VAT Inc.
6.58 VAT Exc. Add to cart
LNBF PLL Octagon Green HQ 10Ghz Es'Hail2 QO100
Octagon Universal LNB Green HQ series (high quality), 100% PLL , very stable, 0.1dB noise factor and low power consumption: 80-95mA max. (Single), 100-120 mA max. (Twin
7,50 € VAT Inc.
6.25 VAT Exc. Add to cart
BIAS-TEE for QO-100 or LNA 30MHz to 4GHz F1OPA
This BT4G-based BIAS-TEE is used to power a LNA or a 10Ghz PLL LNB to receive the QO-100 / Es'Hail2 satellite. The BT4G covers the frequency bands from 30 MHz
15,50 € VAT Inc.
12.92 VAT Exc. Add to cart
RF Amplifier 2400 MHz 20dB Analog Devices CN0417
The Analog Devices CN0417 is a small RF power amplifier, powered by micro-USB, optimized to operate on 2400 MHz with 100mW max, gain of 20-21dB max., with a integrated
59,00 € VAT Inc.
49.17 VAT Exc. Add to cart
RF Amplifier EDUP EP-AB003 2400 MHz (8W) for QO100
EDUP EP-AB003 amplifier for the amateur radio band 2400Mhz (13cm), this 2.4Ghz amp of 8W theoretical, is able to deliver an effective power of 4W with an input of 100mW
52,25 € VAT Inc.
43.54 VAT Exc. Add to cart
LHCP/RHCP patch antenna 2400Mhz QO-100 WA5VJB
PCB antenna WA5VJB single patch for 2.4Ghz with left hand circular polarization LHCP or right hand circular polarization RHCP and a gain of 6dBi. This antenna is
11,88 € VAT Inc.
9.90 VAT Exc. Add to cart
2.4 Ghz SAW Bandpass filter for QO100
This bandpass filter for the 2.4 Ghz (13cm) allows to reject the local oscillator and harmonics frequencies of the Up-Converter for QO-100 to get a clean signal on
25,90 € VAT Inc.
21.58 VAT Exc. Add to cart
2.4 & 10 GHz Dual feed Antenna for Es'hail 2 / QO1
LHCP circular polarized 2.4 / 10 Ghz antenna for 2400 MHz transmission and 10500 MHz reception for Es'hail 2 / QO100 satellite. The 10Ghz reception with this DJ7GP
95,00 € VAT Inc.
79.17 VAT Exc. Add to cart
DuoBand-Feed 2.4 & 10 GHz Antenna with LNB for QO-
This version of DJ7GP's 2.4 / 10 Ghz dual band antenna is ready for use in RX and TX LHCP Circular Polarized for 2400 MHz and 10500 MHz reception for Oscar-100 satellite
125,00 € VAT Inc.
104.17 VAT Exc. Add to cart
Lens for POTY dual band feed antenna
New version of the lens for the POTY antenna and 10 Ghz receiving of the QO-100 satellite with f/D 0.6 offset dish. Amateur radio design: PE1CKK Delivered with: 1
5,00 € VAT Inc.
4.17 VAT Exc. Add to cart

Reviews POTY dual band feed antenna

Grade

Ken R
2019-10-07

High Quality

Manufactured to a high quality. Even though I have a good workshop with lathe, milling machine , pillar drill etc. I could have made my own. However considering each machine would need setting up and total time required. It wasn't worth it. Its all done for you and fits together perfectly with no errors. Very quick to assemble and Great Value for money.

Grade

Paul C
2019-09-01

Test de la POTY

J'ai passé cette antenne à l'anlyseur d'antenne N1201SA
qui monte a 2.7ghz - j'ai assemblé l'antenne en respectant bien la notice d'assemblage. Résultat sur 2.4ghz ROS de 1.8 ce qui est bon elle allume une parabole de 120cms - Je recommande personnelemnt la POTY je recommande sans publicité l'analyseur N1201SA et il y a sur youtube un tuto en Francais bien explicatif - je vais monter une antenne hélice et cet appareil et indispensable pour voir ou on est et règler l'aérien sur le 2.4 ghz. 73

Write your review !

Rating: 5/5 based on 2 reviews
Product: POTY dual band feed antenna 2.4 Ghz & 10 Ghz for QO100
SKU: QO100-ANT-POTY-762
Price: 42,90 € VAT incl.
Availability:In stock, shipped from France

Payment accepted: By Credit Card, VISA, MasterCard, Paypal and bank wire (T/T).

Delivery ECO with Colissimo (5-7 days) or EXPRESS with DHL, TNT, UPS, Fedex (48h/72h). More about our delivery terms.

Package prepared in 1-2 business days in ECO, and same day in EXPRESS by Fedex/UPS/DHL for orders before 10am CEST.

Return product 14 days & 2 years warranty.

Price are in Euros (€) VAT 20% Included

For company inside or outside EU, VAT don't apply, for indivudual in EU, VAT 20% apply. For individual outside EU, VAT will not be applied.