This HD DVB-T stick allows you to receive free...
This HD DVB-T stick allows you to receive free TV channels DVB-T and compatible with DVB-T HD, from a PC, laptop, Raspberry Pi or smartphone with an OTG cable.
The USB stick can also be used as a receiver and scanner from 24Mhz to 1766Mhz (without hole) in RTL-SDR receiver. Equipped with the RTL2832U chipset and the R860 tuner, strictly same as R820T2 specification and use.
Compatible with Windows, 7, 8 and 10, and Linux. In Windows 10, it may be necessary to add the audio codecs (AC3) to have the sound of the TNTHD channels.
Antenna connector on the USB stick: MCX Female.
Delivered complete: Dongle receiver TNT HD, mini magnetic antenna VHF/UHF, CD with software Blaze HDTV 5 to receive TNT and supplied with serial number Blaze TV 5.
Also available USB DVB-T2 stick for the new standard DVB-T2 HD coming in Europe H.265 HEVC (used in Germany).
You can use this USB stick TV receiver in classic HD TNT mode, or in SDR receiver mode, in which case do not install the DVB-T drivers but only the RTL-SDR drivers.
To receive DVB-T and digital radio, the antenna delivered is generally sufficient if you are in the city, normally, covered. In all cases, it is advisable to place the antenna closest to a window and in height on a metal support, thanks to the magnetic base.
If you have an outdoor TV antenna or a collective UHF antenna, you will noticeably increase reception quality and receive signal levels.
Tip: Increase the reception range of the HDTV signal with MCX <> TV adapter to connect the DVB-T USB stick to an external or collective UHF TV antenna jack.
To use this USB stick in SDR scanner mode, it is necessary to choose an antenna adapted to the frequency range to be listened to in VHF and/or UHF and to put an antenna outside on the edge of a window or ideally and the highest and clearest possible on a roof.
Consult the SDR antenna range, as well as the mounting brackets.
If you do not have sounds on certain channels and especially the channels in HD TNT, under Windows 7 or 10, the main reason is the absence of AC3 audio codecs on Windows.
AC3 codecs can be downloaded by installing ffdshow in both 32-bit and 64-bit versions.
Tutorial to configure ffdshow available on Pouchin.tv.
MCX Male to UHF Female Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832+R820T or R820T2.Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to choose
5,63 €tax excl.7,50 € -10%
MCX Male to BNC Female Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832 +R820T & R820T2. Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to
4,88 €tax excl.6,50 € -10%
MCX Male to SMA Male RF Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832 +R820T & R820T2.RG 316 coaxial cable 50 ohms, about 15cm long.
4,43 €tax excl.5,90 € -10%
This RF adapter converts a SMA male connector to a Female TV connector. This RF Adapter lets you connect an indoor or outdoor TV antenna on a equipment with an SMA female connectors in it.
3,68 €tax excl.4,90 € -10%
This RTL-SDR USB stick features the Realtek RTL2832U chipset and the new R860 tuner, new version of the R820T2 strictly identical and specifically designed for use in SDR mode.The new R860/R820T2
16,58 €tax excl.
This RF adapter converts a MCX male connector to a Female TV connector. RF Adapter to connect an indoor or outdoor TV antenna on a equipment with an MCX female connectors in it such as DVB-T SDR USB
2,93 €tax excl.3,90 € -10%
This RF adapter converts a MCX male connector to a SMA Female connector. RF Adapter to connect an indoor or outdoor antenna on a equipment with an MCX female connectors in it such as DVB-T SDR USB
2,96 €tax excl.3,95 € -10%
Coaxial cable SMA Male to MCX Male with 50-ohms coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 1 or 5 metersConnector 1: SMA MaleConnector 2: MCX Male
7,43 €tax excl.9,90 € -10%
Telescopic and magnetic antenna with MCX male connector for USB stick RTL-SDR, this antenna work in reception only from 100MHz to 500Mhz or so. Frequency (reception only): 100-500Mhz (VHF-UHF)
2,42 €tax excl.
The NESDR SMART V4 usb dongle is the new improved version of the famous RTL-SDR USB stick with the RTL2832U chipset and R820T2 and tuner, to receive all frequencies from 24 to 1700MHz (without gap)
43,68 €tax excl.
USB OTG host cable adapter ompatible with Motorola Xoom, Samsung Galaxy S2/S3/S4/S5, Nokia N900/N810, and any other Micro USB devices with USB Host mode support features supported. - Connector Micro
0,83 €tax excl.
Optimized version of RTL-SDR.com, with R820T2 tuner for reception from 24 to 1766 MHz. The characteristics of the dongle RTL-SDR.com v3:- TCXO at 1 PPM (better stability and precision in frequencies)-
33,25 €tax excl.
This band-cut filter is design by RTL-SDR.com, it blocks and reject broadcast FM band between 88 to 108 MHz with over 50dB of attenuation. Insertion loss is less than 0.5 dB between 0-1 GHz, and less
19,92 €tax excl.
This wide-band LNA preamp improves reception performance from 50 Mhz to 4 Ghz, it is based on SPF5189Z, with a noise factor of less than 1 dB.This LNA is designed to be powered by BIAS-T with a power
21,67 €tax excl.
75 Ohm TV coaxial cable with TV connector and double ferrite.Length: Exists in 2 or 5 metersConnector 1: TVConnector 2: TVImpedance: 75 ohms This cable can be used for SDR reception, the attenuation
1,46 €tax excl.3,50 € -50%
This RF adapter converts a SMA female connector to a TV male connector. Sold individually.
3,98 €tax excl.5,30 € -10%
Comme prévu la clé fonctionne bien avec sdr# mais l'antenne est inefficace ( ce n'est pas une découverte)
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal