This RTL-SDR USB stick features the Realtek RTL2832U chipset and the new R820T2 tuner specifically designed for use in SDR mode.
The new R820T2 tuner offers better sensitivity (+ 2dB to 5dB) and a low noise compared to the previous R820T version.
Used with a SDR software, this becomes a scanner, broadband receiver from 24 MHz to 1766 MHz (without gap) and all modes (AM, FM, SSB, CW, DATA, ADSB, DMR) with the appropriate software.
Package include : 1 Dongle TNT/SDR only (without remote, nor CD or antenna optionally available with MCX male connector).
The antenna connector on the USB stick is MCX Female.
Add HF bands: With the Pack Passion Radio SDR, ready to use, with cable, connector and HF converter SDR to hear frequencies from 0.5 to 50 MHz.
Manuel et guide en français d'installation et configuration du converter HF et du pack Radio SDR 3.61M
RTL-SDR drivers for Windows 7, 8, 10 4.91M
To get the most out of this RTL-SDR usb stick in scanner mode, it is necessary to adapt the antenna to the frequencies to be listened to and to place it outside, on the windowsill and ideally the highest and clear possible on a mast and a roof for example.
The antenna to be taken for this RTL SDR key must be with an MCX Male connector.
MCX Male to UHF Female Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832+R820T or R820T2.Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to choose
MCX Male to BNC Female Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832 +R820T & R820T2. Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to
MCX Male to SMA Male RF Adapter. The MCX connector is compatible with the USB Dongle DVB-T RTL2832 +R820T & R820T2.RG 316 coaxial cable 50 ohms, about 15cm long.
Right angle RF connector SMA female, to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 15,46 x 6 x 6 mmThis RF connector is manufactured in accordance
This HD DVB-T stick allows you to receive free TV channels DVB-T and compatible with DVB-T HD, from a PC, laptop, Raspberry Pi or smartphone with an OTG cable.The USB stick can also be used as a
This RF adapter converts a MCX male connector to a Female TV connector. RF Adapter to connect an indoor or outdoor TV antenna on a equipment with an MCX female connectors in it such as DVB-T SDR USB
This RF adapter converts a MCX male connector to a SMA Female connector. RF Adapter to connect an indoor or outdoor antenna on a equipment with an MCX female connectors in it such as DVB-T SDR USB
This RF adapter converts a MCX male connector to a UHF Female connector. RF Adapter to connect an indoor or outdoor antenna on a equipment with an MCX female connectors in it such as DVB-T SDR USB
The LNA4ALL is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors and for RF frequencies covering all bands from 28MHZ to 2500 MHz. It improves greatly reception performance, on
Allows to control by USB the change of frequencies of an SDR software and to get a classic operation of a VFO on a radio hardware SDR!Fully configurable with the supplied software, Shuttle Xpress is
Telescopic and magnetic antenna with MCX male connector for USB stick RTL-SDR, this antenna work in reception only from 100MHz to 500Mhz or so. Frequency (reception only): 100-500Mhz (VHF-UHF)
This Nooelec USB RTL-SDR stick is equipped with the Realtek chipset RTL2832U and E4000 tuner offering a wider frequency coverage than R820T2. Associated with SDR software, this USB stick will become
The NESDR SMART usb dongle is the new improved version of the famous RTL-SDR USB stick with the RTL2832U chipset and R820T2 and tuner, to receive all frequencies from 24 to 1700MHz (without gap) and
USB OTG host cable adapter ompatible with Motorola Xoom, Samsung Galaxy S2/S3/S4/S5, Nokia N900/N810, and any other Micro USB devices with USB Host mode support features supported. - Connector Micro
Optimized version of RTL-SDR.com, with R820T2 tuner for reception from 24 to 1766 MHz. The characteristics of the dongle RTL-SDR.com v3:- TCXO at 1 PPM (better stability and precision in frequencies)-
This band-cut filter is design by RTL-SDR.com, it blocks and reject broadcast FM band between 88 to 108 MHz with over 50dB of attenuation. Insertion loss is less than 0.5 dB between 0-1 GHz, and less
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal