The RigExpert Stick Pro is a vector analyzer...
The RigExpert Stick Pro is a vector analyzer (VNA) of antennas and cables. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many more in the frequency range from 100 kHz to 600 MHz .
The Stick Pro analyzer has a compact size and light weight, which is ideal for using the analyzer at home and in the field.
Comes with: 1 RigExpert Stick Pro antenna analyzer, 1 Li-ion battery, 1 quick start guide, 1 neck strap, 1 USB cable, 1 N-UHF adapter.
Frequency range: 0.1 ~ 600 MHz
No frequency input: 1 kHz
Measurements for 25, 50, 75, 100, 150, 200, 300, 450 and 600Ω systems
SWR measurement range: from 1 to 100 in digital mode, from 1 to 10 in graphic mode.
R and X range: 0 ... 2000, -2000 ... 2000
Operating modes: SWR, return loss, R, X, Z, L, C, magnitude and phase angle at one frequency. TOS graph, 100 points. Multé Mode - for quick testing of a multiband antenna.
HF output: Connector type: N-Female
Output signal form: pies, 0.1 to 600 MHz
Output power: -10 dBm (at a 50 Ohm load).
Power supply: A 3.7V lithium-ion battery. When the analyzer is connected to a PC or to a DC adapter with a USB connector, it is powered by the following sources.
Interface: 200 × 200 TFT screen. 2 × 3 keys on the waterproof keyboard.
Menu and help screens in English.
USB connection to a personal computer
Bluetooth: v.4.2 BLE singlemode, class B
Dimensions: 185mm x 40mm x 33mm
Operating temperature: 0 to 40 ° C
Weight: 185 g with battery
2 years warranty
The RigExpert Stick Pro is made in Ukraine.
RF adapteur N Male to UHF female (SO-239). Nickelplated.
Frequency range 1-3000 MHz, 2 ports VNA with S11 and S21, RF Generator with output power of -6dBm @ 500 MHz, Low power consumption, 370mA @ 5 V, SMA connectors, boot loader for future firmware
The mini-VNA Pro² BT is a portable VNA antenna and network analyzer that covers from 0.1 to 230Mhz, it has a 1000mAh internal Li-ion battery and a new Bluetooth interface to let use the mini-VNA Pro
RF adapteur N Male to UHF Male (PL259). Impedance 50ohms.
RF adapteur N Male to SMA female. Nickelplated.
This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2 or NanoVNA and any VNA.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit
N Male - N Male coaxial cable with low loss 50 ohm coaxial cable KSR195 for use from 0 to 6Ghz.Available lengths: 1, 2 or 5 metersConnector 1: N MaleConnector 2: N Male
The NanoVNA-F Deepelec version is the enhanced version of the open-source Antenna and Vector Network (VNA) analyzer that covers the HF, VHF and UHF bands from 50 KHz to 1500 MHz with metal case and
The RigExpert AA-600 is a powerful antenna analyzer designed to test, verify, tune or repair antennas and antenna feed lines operating from 0.1 to 600 Mhz . The measurement of the SWR (standing wave
The RigExpert Stick-230 antenna analyzer is designed to measure SWR (standing wave ratio), return loss, and other parameters of cable and antenna systems in the 100 kHz range at 230 MHz . It has an
The RigExpert AA-230 ZOOM antenna analyzer with Bluetooth 4.0, allows measurement of SWR, return loss, cable loss, in the frequency range 100 kHz to 230 MHz . The integrated ZOOM function makes
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal