PCB for Zigbee with built-in antenna and based on the genuine Texas Instrument CC2530 RF chip, the 8051 microcontroller for a wireless Zigbee transceiver with 2.4 GHz IEEE 802.15.4 protocol and 2.5mW power.
Comes with: 1 EBYTE E18-MS1-PCB board (with integrated 2.4Ghz antenna).
Reminder: This radio communication equipment is to be used in accordance with the legislation in force in the country of use and under the sole responsibility of the user.
Be the first to ask a question about this product!
PCB antenna WA5VJB Yagi 5 elements for 2.4Ghz with a gain of 10dBi. The antenna is delivered without connector (solder wire).Frequency: 2400-2450 MHzType: YagiNumber of elements: 5Gain:
The Analog Devices CN0417 is a small RF power amplifier, powered by micro-USB, optimized to operate on 2400 MHz with 100mW max, gain of 20-21dB max., with a integrated bandpass filter 2400 to
EDUP EP-AB007 amplifier for the amateur radio band 2400Mhz (13cm), this 2.4Ghz amp of 4W theoretical, is capable of delivering an effective power of 2W with a power input of 100mW max.This RF
This bandpass filter for the 2.4 Ghz (13cm) allows to reject the local oscillator and harmonics frequencies of the Up-Converter for QO-100 to get a clean signal on the satellite, with a max. input
WIFI 2400 MHz PCB antenna (2.4 Ghz) with a gain of 4dBi. The antenna comes with a 15cm long soldered wire and an IPEX UFL connector.Frequencies: 2400-2490 MHzBands: WIFI 802.11n / b / gGain:
Long-range distance PCB module for Zigbee with 2.4Ghz integrated antenna, based on the Texas Instrument CC2530 genuine RF chip, the 8051 microcontroller, the CC2592 power amplifier for a Zigbee
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal