This directional Log Periodic antenna is...
This directional Log Periodic antenna is designed in PCB and operates from 850MHz to 6,5GHz with 5-6 dBi gain.
Works with Ettus USRP B200mini and all equipment operating in this frequency range. The antenna connector is SMA female and comes with the antenna (you just will have to make the solder to the PCB antenna card).
Optional: Cable and adapter SMA Male <> SMA Male to connect the antenna to the SDR device SDR
Package includes: Antenna ETTUS LP0965 and SMA socket.
Right angle RF connector SMA female, to solder on PCB.Frequency of use: From 0 to 3 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 15,46 x 6 x 6 mmThis RF connector is manufactured in accordance
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available in
Dual band directional antenna Original Diamond SRH-789 with SMA Male connector, for receiving and transmitting on VHF-UHF bands (144/430 MHz) and reception on aviation bands 120/150/300/450/800 MHz
The LNA4ALL is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors and for RF frequencies covering all bands from 28MHZ to 2500 MHz. It improves greatly reception performance, on
This RF adapter allows is equipped with an SMA Male connector on both sides.It allows to connect for example 2 cables or connectors in SMA female.
This RF adapter allows is equipped with an SMA Female connector on both sides.It allows to connect for example 2 cables or connectors in SMA Male.
Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male
Omnidirectional antenna with ground plane (GP) to receive ADS-B between 1030 and 1090 MHz. The antenna is supplied without cable and no assembly. This antenna has a diode protection against
PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 400-1000
SIRIO SD 3000 N/U discone antenna, wide band covering all frequencies in reception from 300 to 3000 Mhz and the amateur radio bands 70cm, 23cm in transmission, with N female connector on the SD3000N
MMIC prototype circuit for connection with coaxial cable. Supplied without connector (coaxial soldering).This compact prototype board is compatible with more than 100 of the most popular MMIC
MMIC prototype circuit on PCB for connection with SMA connectors (available as an option below).Supplied without SMA connector (solder).Fits standard SMA PCB connectors, including with SMA
PCB Log periodic antenna, for frequency from 850MHz to 6.5GHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 850-6500
PCB Log periodic antenna, for frequency from 2000 to 11000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 200-11000
Straight RF connector SMA female to solder on PCB.Frequency of use: From 0 to 10 GhzBrass plated GOLDImpedance: 50 OhmsDimensions : 13,41 x 6.5 x 6.5 mmThis RF connector is manufactured in accordance
Nooelec PCB Patch antenna for Inmarsat L-band application (Inmarsat AERO / STD-C) and satellites on 1550 Mhz. The antenna is delivered with female SMA connector soldered on the PCB.The antenna works
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal