SDR Transceiver from 70 MHz to 6 GHz with 56 MHz of instantaneous bandwidth.
The Ettus USRP B205MINI operates in full duplex mode 1x1 and is powered by USB 3.0 port.
Size: 50 x 84 mm
Comes with: B205mini-i board only.
The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the sensitivity of the device
This directional Log Periodic antenna is designed in PCB and operates from 850MHz to 6,5GHz with 5-6 dBi gain. Works with Ettus USRP B200mini and all equipment operating in this frequency range. The
PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 400-1000
SIRIO SD 3000 N/U discone antenna, wide band covering all frequencies in reception from 300 to 3000 Mhz and the amateur radio bands 70cm, 23cm in transmission, with N female connector on the SD3000N
SDR Transceiver B210 wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen, MIMO (2 Tx & 2 Rx). The Ettus USRP B210 operates in full duplex mode,
The LimeSDR is an open-source SDR receiver and transmitter covering frequencies from 0.1MHz to 3.8GHz full-duplex with a bandwidth of 64Mhz, 2x2 Mimo. It can transmit and receive UMTS, LTE, GSM, LoRa,
Ettus official protective metal case for the USRP B205MINI SDR transceiver. This enclosure kit allows users to assemble a steel case to protect the B205MINI-i board-only device, and increases
The XTRX PRO is the first embedded SDR in Mini PCI format and with RX and TX in Full-Duplex (2x2 MIMO) for frequencies from 30Mhz to 3.8Ghz, stabilized with integrated GPSDO, sampling rate up to 120
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal