SDR Transceiver B210 wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen, MIMO (2 Tx & 2 Rx).
The Ettus USRP B210 operates in full duplex mode, MIMO (2 Tx & 2 Rx), and is powered by USB 3.0 port.
Compatible with open-source software GNU Radio (maintained by Ettus Research) and API UHD.
Transmitter power: 10dBm
Comes with: Board Ettus B210, USB 3.0 câble.
The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the sensitivity of the device
SMA Male to UHF Male Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available in
Antenna discone mobile Diamond D220-R, receiving from 100Mhz to 1600MHz and 144/430/904/1200MHz for transmitting. Type:1/2 wave (144MHz),5/8 wave (430MHz)Length:70cmWeight:360g Gain:2.15dBi
SDR Transceiver wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen. The Ettus USRP B200 MINI operates in full duplex mode and is powered by USB 3.0
This directional Log Periodic antenna is designed in PCB and operates from 850MHz to 6,5GHz with 5-6 dBi gain. Works with Ettus USRP B200mini and all equipment operating in this frequency range. The
PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 400-1000
SIRIO SD 3000 N/U discone antenna, wide band covering all frequencies in reception from 300 to 3000 Mhz and the amateur radio bands 70cm, 23cm in transmission, with N female connector on the SD3000N
The LimeSDR is an open source SDR transceiver covering RF frequencies from 10 MHz to 3.5 GHz in full duplex , 1x1 mimo and 30.72 MHz bandwidth. RF Transmitter: Lime Microsystems LMS7002MFPGA: Altera
The LimeSDR is an open-source SDR receiver and transmitter covering frequencies from 0.1MHz to 3.8GHz full-duplex with a bandwidth of 64Mhz, 2x2 Mimo. It can transmit and receive UMTS, LTE, GSM, LoRa,
PCB Log periodic antenna, for frequency from 850MHz to 6.5GHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 850-6500
PCB Log periodic antenna, for frequency from 2000 to 11000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 200-11000
Vivaldi Directional Antenna, works from 1.5 Ghz to 15 GHz with a gain of 8-10 dBi.The coaxial cable to power this ultra wideband antenna Vivaldi antenna is soldered directly to the PCB.Frequencies:
Omni-directional planar antenna, works from 700 Mhz to 26 GHz with a gain of 2-5 dBi.The coaxial cable to power this ultra wideband Planar antenna is soldered directly to the PCB.Frequencies: 700 Mhz
Ettus official protective metal case for the USRP B200 and B210 SDR transceiver Green PCB series only. This enclosure kit allows to assemble a steel case to protect the B200/B210 board-only device,
The XTRX PRO is the first embedded SDR in Mini PCI format and with RX and TX in Full-Duplex (2x2 MIMO) for frequencies from 30Mhz to 3.8Ghz, stabilized with integrated GPSDO, sampling rate up to 120
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal