SG Labs 13cm V1.4 Transverter 432-2400 MHz for QO-100 View larger
SG LAB

SGLABS-TRANSVERTER-13CM-1802

New product

Bulgaria

SG Labs 13cm V1.4 Transverter 432-2400 MHz for QO-100

rating No review at the moment

The SG LABS 13cm v1.4 transverter for QO-100, allows transmitting from a 432 MHz UHF SSB station to 2400 MHz (13cm) on the uplink channel of the QO-100 satellite with a maximum output power of 2W.

  • Low noise figure, GaAs HEMT input stage
  • High performance UP / DOWN converters
  • High stability TCXO
  • Input for external 10 MHz reference oscillator
  • Internal Tx/Rx switch
  • Split Tx/Rx capability (selectable, soldering required)
  • Internal directional coupler
  • PTT can be switched by connecting the PTT to ground, by RF power supply (RF VOX) or by DC voltage
  • Output SWR indicator - two-colour LED
  • Optimal input power indicator - two-colour LED
  • Integrated sequencer
  • 4 LO frequencies, PC programmable (RS-232, 3.3V levels)

This equipment is intended for amateur radio use only on the 13cm band.

Delivered with : Transverter SG LABS v1.4, with case, delivered assembled and tested.

More details

This material is no longer available

Download

Data sheet

  • TX output frequency: 2300-2425 MHz (13cm)
  • TX input frequency: 430-440 MHz (typical 432MHz)
  • TX input power: 0.2 to 5W maximum
  • TX output power: 2 Watts
  • Power supply: 12V to 13.8V
  • Power consumption: 1A
  • Connectors: SMA female
  • Dimensions: 124x94x25mm
  • Amateur radio design: LZ5HP - SG LABS
  • 2 years warranty*.

* The warranty does not cover PA and power loss, which may result from incorrect mounting, incorrect antenna adjustment (VSWR), maximum input power not respected, short circuit in the power supply or on the coaxial line.

  • Coaxial cable 1,2, 5 or 10m SMA Male and bare end (KSR195) Passion Radio SMA CABLE-COAXIAL-SMA-M-1M-4959
    7,05 € 7,42 € tax excl. -5%tax excl. In stock

    -5%

    Reference: CABLE-COAXIAL-SMA-M-1M-4959

    Coaxial cable extension 1.2, 5 or 10m SMA Male and bare end (KSR195)

    Low-loss 50 ohm coaxial cable KSR195 5mm, for use from 0 to 6Ghz and with an SMA Male connector at one end and without connector at the other end (bare end to be soldered or crimped). Length:

    7,05 €

    7,42 €

    Online only Reduced price!
  • BIAS-TEE for QO-100 or LNA 30MHz to 4GHz F1OPA OPA Design Satellite & QO-100 QO100-OPA-BIAS-T1-760
    13,75 €

    Reference: QO100-OPA-BIAS-T1-760

    BIAS-TEE for QO-100 or LNA 30MHz to 4GHz F1OPA

    This BT4G-based BIAS-TEE with SMA female connector is used to power a LNA or a 10Ghz PLL LNB to receive the QO-100 / Es'Hail2 satellite.The BT4G covers the frequency bands from 30 MHz to 4 GHz. The

    13,75 €
    Online only
  • 2.4 Ghz SAW Bandpass filter for QO100 OPA Design SAT Accessory FILTRE-SAW-QO100-F1OPA-824
    21,58 €

    Reference: FILTRE-SAW-QO100-F1OPA-824

    2.4 Ghz SAW Bandpass filter for QO100

    This bandpass filter for the 2.4 Ghz (13cm) allows to reject the local oscillator and harmonics frequencies of the Up-Converter for QO-100 to get a clean signal on the satellite, with a max. input

    21,58 €
    Online only
  • DuoBand-Feed 2.4 & 10 GHz Antenna with LNB for QO-100 Satellite & QO-100 QO100-ANT-207011-DJ7GP-LNB-891
    112,50 €

    Reference: QO100-ANT-207011-DJ7GP-LNB-891

    DualBand Feed 2.4 & 10 GHz DJ7GP V2 Antenna with LNB Single / Twin

    This V2 version of DJ7GP's 2.4 / 10 Ghz dualband feed antenna is ready for use in RX and TX LHCP Circular Polarized for 2400 MHz and 10500 MHz reception for Oscar-100 satellite via LNB head climb.

    112,50 €
    Online only

Reviews

Click here to leave a review

Additional or similar equipment

  • Coaxial cable extension 1.2, 5 or 10m SMA Male and bare end (KSR195)

    Low-loss 50 ohm coaxial cable KSR195 5mm, for use from 0 to 6Ghz and with an SMA Male connector at one end and without connector at the other end (bare end to be soldered or crimped). Length:

    7,05 € tax incl.

    7,05 €tax excl.

    7,42 € -5%
    In stock
  • BIAS-TEE for QO-100 or LNA 30MHz to 4GHz F1OPA

    This BT4G-based BIAS-TEE with SMA female connector is used to power a LNA or a 10Ghz PLL LNB to receive the QO-100 / Es'Hail2 satellite.The BT4G covers the frequency bands from 30 MHz to 4 GHz. The

    13,75 € tax incl.

    13,75 €tax excl.

    In stock
  • RF Amplifier 2400 MHz 20dB Analog Devices CN0417

    The Analog Devices CN0417 is a small RF power amplifier, powered by micro-USB, optimized to operate on 2400 MHz with 100mW max, gain of 20-21dB max., with a integrated bandpass filter 2400 to

    57,50 € tax incl.

    57,50 €tax excl.

  • 2.4 Ghz SAW Bandpass filter for QO100

    This bandpass filter for the 2.4 Ghz (13cm) allows to reject the local oscillator and harmonics frequencies of the Up-Converter for QO-100 to get a clean signal on the satellite, with a max. input

    21,58 € tax incl.

    21,58 €tax excl.

    In stock
  • DualBand Feed 2.4 & 10 GHz DJ7GP V2 Antenna with LNB Single / Twin

    This V2 version of DJ7GP's 2.4 / 10 Ghz dualband feed antenna is ready for use in RX and TX LHCP Circular Polarized for 2400 MHz and 10500 MHz reception for Oscar-100 satellite via LNB head climb.

    112,50 € tax incl.

    112,50 €tax excl.

    In stock
  • Low-loss coaxial cable extension SMA Male angled and SMA straight KSR195

    KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz, with angled SMA connector and straight SMA connector. Lengths available: 50cm, 1 or 2 metresConnector 1: SMA Male angledConnector 2: SMA

    4,13 € tax incl.

    4,13 €tax excl.

    8,25 € -50%
    In stock
  • RF Amplifier 2400 MHz 100mW for QO-100 and Upconverter F1OPA

    This power amplifier equipment with a gain of 30dB is intended to operate primarily with F1OPA's upconverter 144 / 432Mhz - 2400 MHz to traffic on the QO-100 satellite uplink with 100mW output (20dBm)

    41,67 € tax incl.

    41,67 €tax excl.

    Out of stock, available in 2 to 3 weeks
  • Othernet Bullseye LNB TCXO ultra stable for Oscar 100 & KU band satellite

    The Othernet Bullseye LNB is a down-converter for reception of the Oscar 100 amateur radio and those in the Ku band. The Bullseye is one of the most stable and precise LNB to date. It does not need to

    24,92 € tax incl.

    24,92 €tax excl.

    In stock
  • RG402 rigid coaxial cable with SMA Male - SMA Male very low loss

    Very low-loss coaxial cable with male SMA connector on each end, for connecting, for example, a 2.4 Ghz amp to an OQ-100 transverter, or any use requiring a very low-loss cable like the RG402. RG 402

    4,75 € tax incl.

    4,75 €tax excl.

    5,00 € -5%
    In stock
  • RG402 rigid coaxial with SMA Male straight and SMA Male angled

    Very low-loss RG-402 coaxial cable with a straight male SMA connector on one end and an angled SMA connector on the other. For connecting, for example, a 2400 MHz amplifier to an OQ-100 converter, or

    5,15 € tax incl.

    5,15 €tax excl.

    5,42 € -5%
    In stock
  • RG-402 coaxial cable with SMA Male angled x2

    RG-402 ultra-low-loss coaxial cable with male SMA connector angled on 2 sides, 50 ohm ultra-low-loss cable, 10 cm long. Note: This rigid cable can be bent, but once installed in its position of use,

    5,54 € tax incl.

    5,54 €tax excl.

    5,83 € -5%
    In stock
  • DELUXE receiver QO-100 SDR 10 Ghz - 739 Mhz for Oscar 100 satellite

    This DELUXE QO-100 receiver pack includes the elements necessary for the 10 Ghz reception of the Oscar-100 satellite (QO-100) in SDR mode on the 739 Mhz frequency with the RTL-SDR V3 dongle equipped

    73,63 € tax incl.

    73,63 €tax excl.

    In stock
  • QO-100 / Es'Hail 2 hamradio satellite sticker (3 sizes sticker)

    Round pre-cut sticker, representing the 1st geostationary hamradio satellite QO-100 (Es'Hail 2) and available in 3 sizes: S and M and LWhite vinyl decal 3 sizes: S = diameter 8cm , M = diameter 15cm

    0,67 € tax incl.

    0,67 €tax excl.

    In stock
  • 2.4 Ghz variable gain pre-amplifier SG LAB

    Variable gain pre-amplifier with 15dBGain control in 1 dB stepsAdditional filtering for the 2.4 GHz bandPower supply 8-30 V DCOutput detector This equipment is intended for amateur radio use only on

  • 2400 MHz 20W V3 SG LAB Amplifier for QO-100 in SDR

    The SG LAB 2400 MHz V3 amplifier is intended to be used for amateur radio traffic on the QO-100 satellite and the 2.4 Ghz channel. It allows to output up to 20W maximum from an input between 40mW and

  • ICOM IC-905 transceiver all modes 144 /430/1200/2400/5600 MHz + 10 GHz (option)

    VHF/UHF/SHF digital and analog amateur radio base IC-905, all modes coverage: 144/430/1200MHz (10W), 2400/5600MHz (2W) and 10GHz (0.5W) with CX-10G (optional). All modes: SSB, CW, AM, FM, D-STAR

    3 332,50 € tax incl.

    3 332,50 €tax excl.

    Expected to be available in summer 2023
  • 120cm tripod for satellite dish

    This tripod is a mobile support used for satellite dishes from 60 cm to 80 cm in diameter. The mast is adjustable up to 120 cm, and can be rotated in all directions. Made of lightweight and stable

    24,92 € tax incl.

    24,92 €tax excl.


Delivery Europe & Overseas

Stock and shipped from France

Product return

14 days to return, 2 warranty

Email support

Response within 24h to 72h

Secure payment

SSL, VISA, Mastercard, Paypal

Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.