AirNav RadarBox FlightStick is a precision-tuned ADS-B receiver RTL-SDR dongle for peak performance on 1090 MHz, with SMA connector.
With integrated amplifier, 1090Mhz filter and static protection, for optimum ADSB reception coverage.
Supplied with: 1 FlightStick AirNav RadarBox dongle.
Installation of Zadig drivers for the FlightStick RadarBox key, for Windows. 12.1M
Decode and display Mode-S / ADS-B transmissions (with software to download from here https://www.radarbox.com/legacy-software)
With integrated filter and integrated amplifier
With R820T2 tuner
Antenna connector: SMA female
RadarBox Raspberry Pi client support
Real-time sharing and reception on RadarBox.com for Windows or RadarBox for iOS and Android applications
Compatible with software: RTL1090 for Windows, planeplotter or Dump1090 for Linux
Up to 2x more decoding and coverage compared to a conventional R820T2 dongle
CE and FCC certified
2 years warranty
FlightStick driver installation
This USB stick is configured and used in the same way as a traditional RTL-SDR dongle.
The manufacturer provides Zadig drivers to install after connecting the USB key to a free port.
If you have a problem installing the FlightStick drivers, use the Zadig software and install the drivers as follows:
1 - Download the latest version of Zadig, you will need to use 7zip, winrar or winzip to decompress the archive
2 - Run the Zadig.exe file in administrator mode (right-click then "run as administrator")
3 - In Zadig, Click on the “Options” menu, then check “List all devices”
4 - Select from the drop-down menu: "Bulk-In, Interface (Interface 0)" or "RTL2832U" or "RTLxxxx"
5 - Start the update of the WinUSB driver by clicking on "Replace drivers"
You will have to run Zadig for each USB port that you use with the dongle, in case of changing the USB port, you will have to restart the driver update process with Zadig.
This RTL-SDR USB stick features the Realtek RTL2832U chipset and the new R820T2 tuner specifically designed for use in SDR mode.The new R820T2 tuner offers better sensitivity (+ 2dB to 5dB) and a low
Omnidirectional antenna with ground plane (GP) to receive ADS-B between 1030 and 1090 MHz. The antenna is supplied without cable and no assembly. This antenna has a diode protection against
This Nooelec USB RTL-SDR stick is equipped with the Realtek chipset RTL2832U and E4000 tuner offering a wider frequency coverage than R820T2. Associated with SDR software, this USB stick will become
The NESDR SMART usb dongle is the new improved version of the famous RTL-SDR USB stick with the RTL2832U chipset and R820T2 and tuner, to receive all frequencies from 24 to 1700MHz (without gap) and
USB OTG host cable adapter ompatible with Motorola Xoom, Samsung Galaxy S2/S3/S4/S5, Nokia N900/N810, and any other Micro USB devices with USB Host mode support features supported. - Connector Micro
Optimized version of RTL-SDR.com, with R820T2 tuner for reception from 24 to 1766 MHz. The characteristics of the dongle RTL-SDR.com v3:- TCXO at 1 PPM (better stability and precision in frequencies)-
Tilting antenna for receiving ADS-B signals and ACARS message on 1090 MHz frequency, with SMA male connector. Available in 2 versions: 3.5dBi (11cm) or 5dBi (19cm).Length: 11cm / 19cmWeight: 9g /
This band-pass / bandstop ADS-B filter for the 1090Mhz improves ADSB receive performance and suppresses signals outside the 1090Mhz band.Delivered with: 1 F1OPA 1090Mhz SAW Bandpass Filter.
The Start ADS-B pack allows you to have a portable station for receiving ADS-B messages from aircraft and to follow their movements on a map in real time, via a Windows or Linux computer.Included in
Fixed vertical fiberglass antenna for ADS-B 1090 Mhz reception, for use as an outdoor pole, with mounting bracket included and female N antenna connector.This ADS-B antenna consists of a half-wave
Fixed outdoor fiberglass antenna for ADS-B reception on 1090 Mhz, with SMA connector.Omnidirectional antenna optimized for long and short range ADS-B reception. It includes a 10 meter coaxial cable,
This 1090 Mhz ADS-B bandpass / band-stop filter to improve ADS-B reception performance and suppress parasitic signals outside the 1090Mhz band. With SMA male and SMA female connector. Compatible with
This 1090 Mhz ADS-B LNA pre-amplifier and SAW filter is designed to improve reception performance and increase the number of ADS-B messages received and decoding. It incorporates an LNA and a SAW
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal