No products
Viewed products
Nooelec LaNA WB amplifier, broadband LNA module...
View larger
Online only
No review at the momentNooelec LaNA WB amplifier, broadband LNA module for RF and SDR applications, covering 300 MHz to 8 GHz. Designed to offer high gain, excellent linearity and a very low noise figure, it improves reception of weak signals while ensuring maximum compatibility with a wide range of receivers. Power supply via Bias-Tee, USB-C or DC connector.
Supplied with : LaNA WB LNA module in aluminium housing.
Reference: OPA-LNAHF-HFLNA-284
The LNA HF from F1OPA is a pre-amplifier and a low-pass filter (LNA), very powerful (+18dB to +20dB), with SMA Female connectors, for HF frequencies and short waves from 500 kHz to 30 MHz, with
Reference: NOOELEC-100722-OUTERNET-467
This LNA and SAW filter from Nooelec is specially designed to operate on 1.5Ghz Outernet frequency band and for Inmarsat radio applications, covering from 1.50GHz to 1.58GHz. It significantly
Reference: QO100-OPA-BIAS-T1-760
This BT4G-based BIAS-TEE with SMA female connector is used to power a LNA or a 10Ghz PLL LNB to receive the QO-100 / Es'Hail2 satellite.The BT4G covers the frequency bands from 30 MHz to 4 GHz. The
Reference: RTLSDR-LNA2-WIDEBAND-764
This wide-band LNA preamp improves reception performance from 50 Mhz to 4 Ghz, it is based on SPF5189Z, with a noise factor of less than 1 dB.This LNA is designed to be powered by BIAS-T with a power
The LNA HF from F1OPA is a pre-amplifier and a low-pass filter (LNA), very powerful (+18dB to +20dB), with SMA Female connectors, for HF frequencies and short waves from 500 kHz to 30 MHz, with
29,58 €tax excl.
This LNA and SAW filter from Nooelec is specially designed to operate on 1.5Ghz Outernet frequency band and for Inmarsat radio applications, covering from 1.50GHz to 1.58GHz. It significantly
26,60 €tax excl.
This BT4G-based BIAS-TEE with SMA female connector is used to power a LNA or a 10Ghz PLL LNB to receive the QO-100 / Es'Hail2 satellite.The BT4G covers the frequency bands from 30 MHz to 4 GHz. The
15,42 €tax excl.
This wide-band LNA preamp improves reception performance from 50 Mhz to 4 Ghz, it is based on SPF5189Z, with a noise factor of less than 1 dB.This LNA is designed to be powered by BIAS-T with a power
21,48 €tax excl.
Wide-band LNA preamp, based on PGA-103+, to improve reception performance from 50 Mhz to 1500 Mhz, with a maximum gain of 20-24dB and a noise factor of 0.4dB.This VHF-UHF LNA offers a very good
31,50 €tax excl.
This SPF5189Z LNA preamp improves reception performance from 50 Mhz to 4000 Mhz, based on SPF5189Z, with a noise factor of 0.6 dB and a maximum gain of approximately 20dB.This low noise amplifier is
8,25 €tax excl.
Nooelec's LANA is a high-gain, 20 MHz - 4 GHz wide band LNA amplifier for SDR applications, with low power consumption and better linearity than the SPF5189Z LNA.The LaNa has 3 different power
25,34 €tax excl.
35,78 € -15%This BIAS-TEE module can be used to power an RF accessory such as an LNA preamp preamplifier or a LNB PLL 10Ghz to receive QO100. Power is supplied via an external DC power supply (30V max.) by
7,08 €tax excl.
The VeGA Barebones is a 30MHz to 4000MHz broadband linear LNA module designed to allow the user to control the level of amplification to achieve the best signal-to-noise ratio (SNR). The device can be
74,68 €tax excl.
Nooelec LaNA HF low-noise amplifier, designed for HF, LF and MF applications, offering a very low noise figure, excellent linearity and a wide frequency range from 50 kHz to 150 MHz. Ideal for
41,48 €tax excl.
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.