Bluetooth dongle open source 2.4 GHz come to use development platform and undertake trials in Bluetooth Class 1. The true power of Ubertooth One is the ability to write your own software to suit your needs.
Ubertooth One can be used as Bluetooth spectrum analyzer in real time, sniffer Bluetooth (LAP sniffing and Kismet) packets.
Come with : Ubertooth one usb stick (without case) and with antenna.
RP-SMA RF connector
CC2400 TRANSMITTER LPC175x
ARM Cortex - M3 microcontroller with Full-Speed USB 2.0
The power transmission and reception is comparable to a Bluetooth Class 1 device sensitivity.
Find the open source documentation on the Download Ubertooth on One:
Telescopic antenna ANT500, VHF-UHF 50 ohms designed to operate in RX from 75 MHz to 1 GHz. Configurable length of 20 cm to 88 cm. Stainless steel SMA male connector and elbow swivel 360 °. This is an
The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the sensitivity of the device
Dual band directional antenna Original Diamond SRH-789 with SMA Male connector, for receiving and transmitting on VHF-UHF bands (144/430 MHz) and reception on aviation bands 120/150/300/450/800 MHz
Frequency range 1-3000 MHz, 2 ports VNA with S11 and S21, RF Generator with output power of -6dBm @ 500 MHz, Low power consumption, 370mA @ 5 V, SMA connectors, boot loader for future firmware
The mini-VNA Pro² BT is a portable VNA antenna and network analyzer that covers from 0.1 to 230Mhz, it has a 1000mAh internal Li-ion battery and a new Bluetooth interface to let use the mini-VNA Pro
Telescopic Antenna ANT700 from 300 to 1100 MHz, made by Great Scott Gadgets. The total length of the antenna ANT700 is configurable from 9.5 cm to 24.5 cm. The ANT700 is constructed of stainless
PandwaRF is a portable RF analyzer with battery and Bluetooth, it is a wireless transceiver for frequencies from 300 to 928Mhz and modulation modes ASK / OOK / MSK / 2-FSK / GFSK, in half-duplex
Designed to succeed the GoodFET project the GreatFET One is a universal USB device. By adding expansion cards called "neighbors", you can turn GreatFET One into a USB device that does almost
This bluetooth device allows you to add wireless to your headset to enjoy music in HiFi quality with this receiver-transmitter audio to add Bluetooth 4.2 technology to all your home audio
Transceiver 2.4 Ghz and Bluetooth 4.2/5.0 PCB module, based on the RF chip nRF52832, with a power of 2.5mW and IPEX / U.FL antenna connector.The ultra-low-power nRF52832 chip supports BLE 5.0 and 2.4
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal