The RigExpert Stick-230 antenna analyzer is designed to measure SWR (standing wave ratio), return loss, and other parameters of cable and antenna systems in the 100 kHz range at 230 MHz .
It has an autonomy of 16 hours of continuous measurements without recharging the battery.
Comes with: 1 RigExpert Stick 230, 1 Li-ion battery type 18650, 1 quick user guide, 1 neck strap, 1 USB cable.
Frequency range: 0.1 to 230 MHz
No frequency input: 1 kHz
Measurements for 25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm systems
SWR measurement range: from 1 to 100 in digital mode, from 1 to 10 in graphic mode
R and X range: 0 ... 10000, -10000 ... 10000
Operating modes :
SWR, return loss, R, X, Z, L, C, magnitude and phase angle at a frequency.
TOS graph, 100 points.
Multé Mode - for quick testing of a multiband antenna.
Connector Type: UHF Female (SO-239)
Output signal form: pies, 0.1 to 230 MHz
Output power: -10 dBm (at a 50 Ohm load)
A 3.7 V lithium-ion battery
When the analyzer is connected to a PC or to a DC adapter with a USB connector, it is powered by the following sources.
Monochrome electronic paper screen with a size of 200 × 200
2 × 3 keys on waterproof keyboard
English menu and help screens
USB connection to a personal computer
Bluetooth: v.4.2 BLE singlemode, class B
Dimensions: 185mm x 40mm x 33mm
Operating temperature: 0 to 40 ° C
Weight: 185 g with battery
2 years warranty
The RigExpert Stick-230 is made in Ukraine. Specifications are subject to change without notice by the manufacturer.
SMA Male to UHF Male Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
RF adapteur N Female to UHF (PL-259). Nickelplated.
Frequency range 1-3000 MHz, 2 ports VNA with S11 and S21, RF Generator with output power of -6dBm @ 500 MHz, Low power consumption, 370mA @ 5 V, SMA connectors, boot loader for future firmware
The mini-VNA Pro² BT is a portable VNA antenna and network analyzer that covers from 0.1 to 230Mhz, it has a 1000mAh internal Li-ion battery and a new Bluetooth interface to let use the mini-VNA Pro
RF adapteur N Male to UHF Male (PL259). Impedance 50ohms.
This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2 or NanoVNA and any VNA.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit
The NanoVNA-F is the enhanced version of the open-source Antenna and Vector Network (VNA) analyzer that covers the HF, VHF and UHF bands from 50 KHz to 1500 MHz with metal case and large screen (11cm)
This RF NanoVNA demo kit consists of a PCB which allows you to test or demonstrate the 18 RF functions or components listed below.This RF test card is recommended for demo and use with VNA antenna
This coaxial cable extension is ready to use, with UHF Male connector (PL-259) Messi & Paoloni, with a diameter of 5.4mm with M&P HYPERFLEX 5 cable, hyper flexible and very light and offering
The RigExpert AA-600 is a powerful antenna analyzer designed to test, verify, tune or repair antennas and antenna feed lines operating from 0.1 to 600 Mhz . The measurement of the SWR (standing wave
The RigExpert Stick Pro is a vector analyzer (VNA) of antennas and cables. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many more in the frequency
The RigExpert AA-230 ZOOM antenna analyzer with Bluetooth 4.0, allows measurement of SWR, return loss, cable loss, in the frequency range 100 kHz to 230 MHz . The integrated ZOOM function makes
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal