Micro-USB USB OTG adapter cable compatible with Samsung Galaxy S2 smartphone S3 S4 S5 and any smartphone / tablet equipped with Micro-USB connector and with OTG-Ready mode.
- Micro-USB connector B male to USB A female
- Universal compatibility with micro-USB and USB
- Right angle connector
- High quality cable
- Length: 25cm
- CE and Rohs standards, 2 years warranty
Comes with: 1 OTG cable right-angle Vention.
This OTG cable allows to connect to a smartphone devices USB 2.0 such as: External hard drive, mouse, keyboard and a dongle RTL-SDR with R820T2 to use a smartphone or tablet as a portable scanner with android application SDR Touch available in Google Play Store.
This OTG USB cable is also compatible with the SDRPlay and the RTL-SDR Smart Nooelec dongle.
Be the first to ask a question about this product!
This USB cable to micro-USB can be used as power cable for Raspberry Pi, cell phone Samsung S3, S4, S5 or any device with micro USB power port.
This is USB 2.0 A Male to 4 Pin B Male is for use with the SDR converter Ham It Up and receiver SDRPlay RSP (all version). Also available in 3 meters lenght. Also suitable forr printer or scanner.
USB 2.0 Male A - Male B cable, transparent blue with ferrite and 3 meters long. It allows the use of a printer or SDR Ham It Up converter card or the SDRPlay RSP receiver. Thanks to its length of 3
This Mini-Whip SDR active antenna allows reception of HF frequencies from 0 to 50 mhz with an SDR receiver.Compact in size, the mini-whip active antenna can be used independently with a 9-volt battery
USB 3.0 cable blue and 1.5 meters in length, Male A to Male B. Speeds more than 10X that of it's predecessor in 2.0 and up to 5.0 Gbs. Warning: This USB cable is a 3.0 version and is not compatible
This band-cut filter is design by RTL-SDR.com, it blocks and reject broadcast FM band between 88 to 108 MHz with over 50dB of attenuation. Insertion loss is less than 0.5 dB between 0-1 GHz, and less
This high-pass notch filter is designed by RTL-SDR.com and rejects the AM broadcast from 500 kHz to 1.7 MHz, with attenuation of more than 50dB. In fact, because of the attenuation, the filter is
Hi-Quality USB 2.0 Vention print cable Male A - Male B, high-speed and ferrite cable for protection against interference and interference.This cable is used to power a printer or scanner, as well as
High-quality USB 2.0 to micro-USB flat cable, Male A - Male B, high-speed.Power cord for Hotspot BlueDV, Raspberry Pi card, phone and smartphone Samsung S3, S4, S5 and any device with micro-USB power
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal