MoRFeus is a broadband frequency generator and upconverter & downconverter from 30 MHz to 6 GHz. With LCD screen and front adjustment knob.
MoRFeus is specifically designed to operate in 85 MHz to 5.4 GHz transmissions using these low-pass and high-pass filters.
Delivered with: 1 MoRFeus with aluminum case and mounted LCD screen.
Input voltage: 5 V
ESD protection (RF IN and OUT ports): IEC 61000-4-2 contact discharge, 8 KV
Bias voltage: 5 V
Active bias current protection: 425 mA
Mixer input/output isolation: see mixer performance
Input IP3: +23 dBm
RF/IF input absolute maximum power: +15 dBm
Operating temperature -40 to +85
Storage temperature range -65 to +150
Dimensions: 88 mm x 38 mm x 68 mm
Weight: 7.4 oz
SMA Male UHF Female (SO-239) Adapter.
The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the sensitivity of the device
This RF adapter allows is equipped with an SMA Male connector on both sides.It allows to connect for example 2 cables or connectors in SMA female.
Frequency range 1-3000 MHz, 2 ports VNA with S11 and S21, RF Generator with output power of -6dBm @ 500 MHz, Low power consumption, 370mA @ 5 V, SMA connectors, boot loader for future firmware
The PortaPack, developp by ShareBrained, is the perfect complement for the HackRF One, it adds a touch screen, navigation buttons, a headphone jack, a real-time clock and a micro SD card reader.Paired
PCB Log periodic antenna, for frequency from 850MHz to 6.5GHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 850-6500
PCB Log periodic antenna, for frequency from 2000 to 11000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 200-11000
Omni-directional planar antenna, works from 700 Mhz to 26 GHz with a gain of 2-5 dBi.The coaxial cable to power this ultra wideband Planar antenna is soldered directly to the PCB.Frequencies: 700 Mhz
The NanoVNA-H and H4 is a low-cost and high-performance antenna and vector network (VNA) analyzer that covers the HF, VHF frequency bands from 50 KHz to 300 MHz with a sensitivity of 70dB, the UHF
The NanoVNA-F is the enhanced version of the open-source Antenna and Vector Network (VNA) analyzer that covers the HF, VHF and UHF bands from 50 KHz to 1500 MHz with metal case and large screen (11cm)
The tinySA is a mini portable spectrum analyzer, for the MF/HF/VHF bands from 100 KHz to 350 MHz and the UHF band from 240 MHz to 960 MHz in degraded mode.It has a switchable 2.6 kHz and 640 kHz
The NanoVNA V2 SAA2N is an antenna and vector network (VNA) analyzer that covers the HF, VHF and UHF bands from 50 KHz to 3000 MHz, with N or SMA type connector and a metal case.It measures the
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal