No products
Viewed products
PCB antenna Yagi 3 elements for 868MHz with a...
The PNI Escort HP 82 is a portable 4w AM/FM CB...
Reference: YAESU-FTX1-OPTIMA-3048
The YAESU FTX-1 OPTIMA is the premium, high-power (100W) version of the FTX-1F FIELD. The OPTIMA version also includes a 100W amplifier with an integrated tuner.Full HF coverage + 50MHz 100W HF
Reference: YAESU-FTX1F-FIELD-2995
Yaesu FTX-1F Field QRP mobile transceiver (replaces FT-818/FT-817) covering HF/50/144/430MHz frequency bands with 6W battery power , 10W external 13.8V power supply andadvanced touch screen.
Reference: WINDCAMP-GIPSY-BALUN-3047
High-performance 1:1 voltage balun specially designed for amateur radio antennas. This compact, lightweight balun ensures a perfect impedance match between your transceiver and your antenna over the
Reference: WINDCAMP-GIPSY-3046
WINDCAMP Gipsy half-wave dipole antenna specially designed for portable amateur radio activities. This antenna can be erected horizontally, in an inverted V, guyed or even vertically. The resonant
Reference: LILYGO-TDECK-PLUS-H736A-3043
All-in-one handheld terminal with colour screen, QWERTY keyboard and LoRa SX1262 868MHz module. Complete solution for mesh communications and IoT applications.2.8-inch TFT colour screen Integrated
Reference: TTGO-T-WATCH-S3-LORA-868-3044
Connected watch with ESP32-S3 and LoRa SX1262 868MHz module. Perfect for portable mesh communications and geolocation applications.1.54-inch colour touchscreen Dual-core ESP32-S3 processor LoRa
Reference: TTGO-T3S3-SX1262-868-3042
ESP32-S3 development module with integrated LoRa SX1262 868MHz chip for long-range communications. Ideal for IoT projects and mesh networks.Dual-core ESP32-S3 processor LoRa SX1262 868MHz module
Reference: WIND-RC2-BNC-3066
The RC-2 BNC version is a compact antenna support designed for the ICOM IC-705 QRP transceiver and for use with an antenna with a BNC connector. The vertical angle is adjustable, and the ARK-705
Reference: GSG-HACKRF-PRO-3040
HackRF Pro from Great Scott Gadgets is an open source RF SDR development board with FPGA, capable of transmitting or receiving radio signals from 100 kHz to 6 GHz, without holes. Designed to enable
Reference: PRESIDENT-WASHINGTON2-3038
The WASHINGTON II CB radio is a top-of-the-range dual-band radio designed for mobile or fixed use. Powered by a 12V supply, it provides AM, FM and SSB communications on the 10m (28MHz) and 12m (24MHz)
Reference: VERO-VR-N76-NOIR-3028
The VGC VR-N76 is a waterproof (IP67) dual-band VHF (144-145 MHz) and UHF (430-440 MHz) walkie-talkie in FM analogue mode, designed for radio amateurs looking for a robust, customisable and connected
Reference: VERO-BATTERIE-BP-26B-3032
BP-26B Battery for the walkie talkie VGC VR-N76, with a capacity of 2600mAh and 7.4V. With charge indicator led and USB-C port to charge directly from the battery with a compatible USB-C power supply
Reference: VERO-VR-N7600-S1-1015
The VGC VR-N7600 from VERO Telecom is the new version of the VR-N7500, with on-board GPS + compass + gyroscope + altimeter + speed. Dual-band 145/430MHz Analogue FM mobile with Bluetooth and fully
Reference: VERO-MICRO-BT-BHM-79-1102
The VGC BHM-79 is a remote Bluetooth microphone with an integrated PTT button and speaker designed to wirelessly connect to radios: VGC VR-N76, VGC NR7600, VGC NR7500, ICOM IC-705 and ICOM ID-52
Reference: DIAMOND-HV5S-3030
The Diamond HV5S is a multi-band mobile amateur radio antenna for the 7/21/50/144/430 MHz HF frequency bands. Its robust construction and ease of installation make it an ideal choice for use in mobile
Reference: DIAMOND-SRH736-3029
Dual-band VHF-UHF antenna (2m/70cm) 36cm long, with very flexible strand, guaranteed original Diamond SRH-36 with male SMA connector, compatible with dual-band VHF-UHF walkie-talkies from Yaesu, TYT,
Reference: ANYTONE-AT-D168UV-3027
TheAnyTone AT-D168UV is a compact dual-band (VHF/UHF) walkie-talkie for radio amateurs, compatible with digital DMR (ETSI Tier I & II) and analogue FM. It includes the main functions of the
Reference: ANYTONE-BATTERIE-QB-56HL-3026
Genuine Anytone QB-56HL high capacity 2600mAh battery for Anytone AT-168UV DMR walkie talkie. Delivered with : Original Anytone QB56HL 2600mAh battery.
Reference: ICOM-IC718-3024
TheIcom IC-718 (new version 2024) is a reliable and affordable HF transceiver, perfect for both novice and experienced radio amateurs. It covers all HF bands from 1.8 to 29.7 MHz, with 100W of power,
Reference: GRAZIOLI-FE62V-2865
Grazioli FE62V 2x 5/8λ 8.12m omnidirectional antenna for the 50MHz band (6m). New version of the FE6V antenna. The ground plane is made up of 4 robust quarter-wave radials 1.4m long. Adjustable
Reference: UNIDEN-UBCD260DN-3023
The Uniden UBCD260DN mobile scanner can listen to DMR, NXDN and dPMR digital modes as well as AM and FM analogue modes, covering frequencies from 25 to 520 MHz, 758 to 960 MHz and 1240 to 1300 MHz.
Reference: LIBRECAL-3021
The LibreCal is a 4-port electronic calibration module designed for the LibreVNA vector network analyser, operating in a frequency range from 9kHz to 6GHz. It enables automatic and accurate
Reference: SIGNALINK-PACK-SLUSB6R-3017
The Signalink SLUSB-6R interface pack is compatible with Président, CRT, Anytone, Kenwood and Ranger RCI radios fitted with a 6-pin microphone socket and listed below.Low-noise USB sound card Quick
Reference: YAESU-FTM510DE-3016
The YAESU FTM-510DE transceiver is a dual-band VHF 144 MHz (55W) and UHF 430MHz (50W) mobile radio, FM analogue and C4FM digital mode, GPS receiver (66 channels), 2.4-inch colour touch screen,
Reference: YAESU-SJMK500-3015
SJMK-500 mounting bracket for the swivelling front panel of the YAESU FTM-500 and FTM-510 handsets, compatible with the different versions : FTM-500D, FTM-500DE and FTM-500DRFTM-510D, FTM-510DE and
Reference: YAESU-SCU-62-3014
Yaesu SCU-62 control cable, 3 metres long, compatible with all versions of the Yaesu set: FTM-500DE, FTM-500 and FTM-500DRFTM-510DE, FTM-510 and FTM-510DR
Reference: SIGNALINK-PACK-SLUSB705-3011
The Signalink SLUSB705 + SLMODHT interface pack is compatible with the ICOM IC-705 radio.Low-noise USB sound card Quick and easy to install with jumper RX and TX adjustment from front panel Supports
Reference: UNIDEN-UBCD160DN-3009
The Uniden UBCD160DN portable radio scanner can listen to DMR, NXDN and dPMR digital modes as well as AM and FM analogue modes, covering frequencies from 25 MHz to 520 MHz and 758 MHz to 960 MHz.
Reference: AA-6675-PREAMPV2-3005
If you want to hunt for super-weak DX signals, in MS, EME, or during contesting, this low-noise 2m preamplifier with bandpass filter is the best choice for demanding users. The very low noise, the
Reference: AA-6734-PREAMP-ADSB-3004
Low-noise 1090MHz outdoor ADS-B preamplifier, with +13.8dB gain, for outdoor use, with box and bracket supplied for mast mounting. ADS-B stands for Automatic Dependent Surveillance-Broadcast. ADS-B
Reference: AA-6670-PREAMP2M-3003
Low-loss input bandpass filter for the 2m band from 144 to 146MHz with PGA-103+ very low noise preamplifier, +25dB gain. The unit contains a high-selectivity, high-Q, low-loss -0.13dB bandpass filter
Reference: AA-6720-PREAMP70CM-3002
Low-loss input bandpass filter for the 70cm band from 430 to 440MHz with PGA-103+ very low noise preamplifier, +20dB gain. The unit contains a high selectivity, high Q, low loss -0.13dB bandpass
Reference: DIGIRIG-ACC891-3001
Auxiliary USB-A cable for the digirig DR-891 with GPS receiver for geolocation and time synchronisation of the Yaesu FT-891.
Reference: SIRIO-SPO868-10-2999
SIRIO SPO-868-10 antenna, for the 868MHz band 20W 10dBi for fixed installation, with N connector, antenna length: 2.5m. For RF applications in the 868 MHz ISM band: Lora, Sigfox, Meshtastic, etc.
Reference: AA-2034-LORA13-3035
This array of LoRa-13 868MHz directive Yagi antennas from Antennas Amplifiers offers 13dBi gain and 126° azimuthal coverage for very stable signals in remote locations. This Antennas Amplifiers (AA)
Reference: AA-2052-LORA15-3034
Yagi 868 MHz LoRa-15 very long range directional antenna from Antennas Amplifiers with 15 dBi gain and 38.7° azimuthal coverage for very stable signals in remote locations. This Antennas Amplifiers
Reference: SIRIO-SPO868-8-3033
SIRIO SPO-868-8 antenna, for the 868MHz band 20W 8dBi for fixed installation, with N connector, antenna length: 1.6m.For RF applications in the 868 MHz ISM band, freely usable without a licence
Reference: RIGEXPERT-24GPA-2961
RigExpert's 2.4GPA power amplifier is designed to operate in the 2.0 to 2.6 GHz frequency band, including 2.4GHz frequencies. It can be used with an input power of 9-14.5 dBm (8-28mW) and a maximum
259,00 €
Reference: RIGEXPERT-AA-ZERO-II-2960
The RigExpert ZERO II Antenna SWR Analyser board is a device for on-board installation and can be used, for example, in antenna tuners, transceivers or power amplifiers as the central element of the
Reference: RIGEXPERT-STICKPRO-1279
The RigExpert Stick Pro is a vector analyzer (VNA) of antennas and cables. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many more in the frequency
Reference: RIGEXPERT-AA35-ZOOM-1278
The RigExpert AA-35 ZOOM is a portable, self-calibrating analyzer designed to measure SWR (standing wave ratio), return loss, cable loss, from 60 kHz to 35 MHz , with a capacity zoom. Frequency range:
329,00 €
Reference: RIGEXPERT-AA55-ZOOM-BT-1277
The RigExpert AA-55 ZOOM Bluetooth is designed to measure SWR (Standing Wave Ratio), return loss, cable loss, and other parameters of cable and antenna systems in the range from 60 kHz to 55 MHz . A
Reference: RIGEXPERT-STICK-230-1276
The RigExpert Stick-230 antenna analyzer is designed to measure SWR (standing wave ratio), return loss, and other parameters of cable and antenna systems in the 100 kHz range at 230 MHz . It has an
335,00 €
Reference: RIGEXPERT-AA650-1275
The RigExpert AA-650 (former AA-600) is a powerful antenna analyzer designed to test, verify, tune or repair antennas and antenna feed lines operating from 0.1 to 650 Mhz and with bluetooth. The
759,00 €
Reference: LIVRE-GUIDE-WRTH-1123
The World Radio TV Handbook WRTH 2025 (79th edition) is the world's most accurate and comprehensive directory of AM, FM, Digital Radio (DAB/HD) and national TV stations. With 800 pages, it has been a
49,76 €
Reference: KRAKENSDR-FULL-PACK-2996
KrakenSDR is the enhanced version of KerberosSDR, an open-source multi-channel SDR receiver designed for direction finding, interferometry, triangulation and location analysis of RF signals from 100
Reference: RFKONNECT-USB-ISOL-2958
RF-KONNECT's USB isolator isolates a USB device from the host computer (PC), ideal for amateur radio stations connected by USB to a computer to reduce noise and interference from a computer.
Reference: KOM-MA-6202-1-2986
Komunica 380-470 Mhz TETRA-UHF magnetic antenna (380-470MHz) + GPS-GNSS, 7.3cm magnetic base and 2.5m cable. Supplied with: 1 Komunica MA-6202-2 antenna, original warranty.
106,95 €
Reference: ICOM-IC7760-2984
The ICOM IC-7760 HF amateur radio decametric base, special 60th Anniversary edition, covers from 1.8 to 30MHz with the 50MHz band (6m) all modes, with 200W power, dual independent receiver and dual
Reference: ICOM-TALKIE-ID52E-PLUS-2983
ICOM ID-52E PLUS VHF/UHF 144-146 and 430-440 MHz walkie-talkie in a special 60th Anniversary edition in metallic grey, with integrated Bluetooth module for wireless connection with Android devices. It
Shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.