The QO100 LimeSDR Mini pack includes the main elements for SDR transmission from a computer, to the 2.4 GHz uplink of the Oscar-100 radio-amateur satellite.
The cables and adapters needed to connect the elements together are included in the pack. The 2.4 GHz POTY or DJ7GP antenna is available below as an option.
Supplied with: 1 LimeSDR Mini, 1 driver amplifier F1OPA (real 100mW), 1 amplifier EDUP (8W - 2-3W in real), 1 bandpass filter Taoglas, 1 cables and 1 RF adapters.
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available in
This RF adapter converts a RP-SMA male connector to a SMA Female connector. Suits for WIFI devices and application. Beware this adapter is a Reverse SMA (RP). It is mainly used in WIFI connections.
The LimeSDR is an open source SDR transceiver covering RF frequencies from 10 MHz to 3.5 GHz in full duplex , 1x1 mimo and 30.72 MHz bandwidth. RF Transmitter: Lime Microsystems LMS7002MFPGA: Altera
EDUP EP-AB003 amplifier for the amateur radio band 2400Mhz (13cm), this 2.4Ghz amp of 8W theoretical, is able to deliver an effective power of 3-4W max. with an input of 100mW maximum.This equipment
This power amplifier equipment with a gain of 30dB is intended to operate primarily with F1OPA's upconverter 144 / 432Mhz - 2400 MHz to traffic on the QO-100 satellite uplink with 100mW output (20dBm)
The Taoglas Airvu 2.4Ghz bandpass filter is a 100Mhz broadband filter, for use in frequency from 2400 to 2500Mhz and a maximum power of 10W.Connector 1: RP-SMA MaleConnector 2: RP-SMA Female Note:
Cable SMA Male to SMA Male with 50-ohm coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 0,5m (50cm), 1, 3 or 5 metersConnector 1: SMA MaleConnector 2: SMA Male
35cm satellite dish with carrying case and fixing, for use in camping, portable, or fixed from a balcony.The camping satellite antenna is easy to mount with an included suction cup mount, the antenna
The POTY / Patch of the Year is a 2.4/10 Ghz dual-band patch antenna, circular polarized 2400 MHz TX and linear horn antenna 10500 MHz RX with dielectric lens (new cylindrical version for offset dish
This V2 version of DJ7GP's 2.4 / 10 Ghz dualband feed antenna is ready for use in RX and TX LHCP Circular Polarized for 2400 MHz and 10500 MHz reception for Oscar-100 satellite via LNB head climb.
The RF-Power 8000 module is a 0.96-inch OLED wattmeter for power measurements from 1nW to 2W (with the use of optional attenuators), from -45dBm to -5dBm in nominal for the frequencies of 1 at 8000Mhz
KSR195 low loss 50 ohm coaxial cable for use from 0 to 6Ghz, with angled SMA connector and straight SMA connector.Available lengths: 50cm, 1 or 2 metersConnector 1: SMA Male angledConnector 2: SMA
The RemoteQTH Pack includes a LNB PLL head modified with TCXO and 25Mhz quartz, as well as a bias-T power supply with adjustable attenuation and available in 2 versions: With a SDR stick on 739Mhz and
The Adalm PlutoSDR QO100 pack includes the main elements for SDR broadcasting from a computer, to the 2400 Mhz uplink of the QO-100 amateur radio satellite. Antenna 2.4Ghz available as an option
The QO100 F1OPA package includes a 144 / 432Mhz upconverter> 2.4Ghz, a 100mW (real) driver amplifier, a 2.4Ghz bandwidth SAW filter (included in converter and amplifier), for the satellite traffic
PowerBlast 30 2.4 Ghz 30W amplifier, LDMOS semiconductor, compatible for amateur radio activities on the QO-100 satellite.Operates with a 32V power supply and an input power of 400 mW (26 dBm) for a
2.4 Ghz linear amplifier with a power of 2W (33dBm), compatible with amateur radio activities on the QO-100 satellite (by using an optional bandpass filter).Works with a 5V power supply and an input
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal