This NanoVNA RF demo kit is composed of a PCB to assemble, to perform tests or demonstration of RF integrated circuit (DIP) and SMT (SMT) components.
Adapted to work with vector network analyzer antenna (VNA) and NanoVNA-H or NanoVNA-F, for measurements from 50 KHz to 1500 MHz.
The testboard kit allows VNA users to quickly test DIP or SMD components for RF circuits to assess their performance.
Supplied with: 1 RF PCB test board (30x60mm), 6 female SMA PCB connectors, 4 M2.5 screws, 2 rows 40 pins, 2 0805 and 49R9 calibration resistors.
SMA Male to N Female Adapter. Coaxial cable RG 316 50 ohms. Available in 15cm, 50cm or 1 meter length (to choose from below).
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available in
This RF adapter allows is equipped with an SMA Male connector on both sides.It allows to connect for example 2 cables or connectors in SMA female.
This RF adapter allows is equipped with an SMA Female connector on both sides.It allows to connect for example 2 cables or connectors in SMA Male.
PERF2+ is an electronic prototyping board designed for electronics enthusiasts and to make prototyping easier and faster. Perf2+ is a double-sided circuit board with perpendicular marks on each side.
This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit and a short
This adapter is a SMA attenuator available in version -3, -6, -10, -15, -20 or -30dB for frequencies from 0 to 6 Ghz.Connector end 1: SMA maleConnectique end 2: SMA femaleImpedance: 50 OhmsPower
The NanoVNA-H and H4 is a low-cost and high-performance antenna and vector network (VNA) analyzer that covers the HF, VHF frequency bands from 50 KHz to 300 MHz with a sensitivity of 70dB, the UHF
The RF-Power 8000 module is a 0.96-inch OLED wattmeter for power measurements from 1nW to 2W (with the use of optional attenuators), from -45dBm to -5dBm in nominal for the frequencies of 1 at 8000Mhz
The NanoVNA-F is the enhanced version of the open-source Antenna and Vector Network (VNA) analyzer that covers the HF, VHF and UHF bands from 50 KHz to 1500 MHz with metal case and large screen (11cm)
The tinySA is a mini portable spectrum analyzer, for the MF/HF/VHF bands from 100 KHz to 350 MHz and the UHF band from 240 MHz to 960 MHz in degraded mode.It has a switchable 2.6 kHz and 640 kHz
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal