The Passion Radio SDR Deluxe Plus V4 pack provides reception coverage between 0.5 to 1766 MHz from a computer running Windows, Mac or Linux.
This V4 version of the pack includes:
- 1 RTL-SDR.com V3 dongle with TCXO, aluminum case
- 1 HF SDR Ham it Up v1.3+ up-converter (stabilized version with TCXO)
- 1 5m male A-B 2.0 USB cable to power the converter
- 1 SMA male <-> SMA male pigtail (15cm) to connect the RTL-SDR key to the up-converter
- 1 SMA Male <> UHF Female (SO239) adapter to connect an external antenna to the converter
- 1 SMA male <-> UHF female pigtail (15cm) to connect a 2nd external antenna to the up-converter
- 1 protective case specially designed for the Ham it Up converter v1.3 + (black)
- 1 VHF-UHF dipole pack antenna with SMA connector (new compared to SDR pack V2)
Compatible with any SDR software for Windows, Mac or Linux: SDR Console, SDR Sharp, HDSDR, SDR Angel, GQRX, CubicSDR or GNU-Radio.
The main difference between the SDR deluxe V3 pack and the SDR V4 pack is reception stability and frequency precision thanks to the TCXO on the RTL-SDR key and on the HF Ham it Up converter.
Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of modulation, from a
SMA Male UHF Female (SO-239) Adapter.
SMA Male to UHF Female Adapter. RG 316 coaxial cable 50 ohms, about 15cm long.
Pigtail RF adapter SMA Male to SMA Male to connect for example a converter Ham it up to a HackRF One, or SDRPlay, and any device with a SMA female connector. Coaxial cable RG 316 50 ohms. Available in
This RF adapter converts a MCX male connector to a SMA Female connector. RF Adapter to connect an indoor or outdoor antenna on a equipment with an MCX female connectors in it such as DVB-T SDR USB
Provides an effective protection against impact and parasites for your converter HF SDR Ham It Up and also gives it a nice looking. The enclosure is made of aluminum and laser engraved, with 2
Optimized version of RTL-SDR.com, with R820T2 tuner for reception from 24 to 1766 MHz. The characteristics of the dongle RTL-SDR.com v3:- TCXO at 1 PPM (better stability and precision in frequencies)-
VHF-UHF telescopic dipole antenna pack for SDR reception and with a flexible tripod and suction pad. This antenna set includes 1 dipole antenna support with 60cm of cable and with male SMA connector,
Hi-Quality USB 2.0 Vention print cable Male A - Male B, high-speed.This cable is used to power a printer or scanner, as well as Upconverter HF Ham it up, SDR receiver SDRPlay: RSP1A, RSPdx or
New version of Passion Radio SDR pack with RTL2832U and new R820T2 tuner and new Ham It Up v1.3 that offers better sensitivity and selectivity. The pack Passion Radio SDR transforms a computer, PC or
This Mini-Whip SDR active antenna allows reception of HF frequencies from 0 to 50 mhz with an SDR receiver.Compact in size, the mini-whip active antenna can be used independently with a 9-volt battery
The new Deluxe Passion Radio SDR V3 pack include: - 1 USB TNT SDR stick new release (RTL2832U + tuner R820T2) - 1 converter HF SDR Ham it Up 1.3 (new release) - 1 USB cable male A-B 2.0 of 5 meters to
The LNA HF from F1OPA is a pre-amplifier and a low-pass filter (LNA), very powerful (+18dB to +20dB), with SMA Female connectors, for HF frequencies and short waves from 500 kHz to 30 MHz, with
Allows to control by USB the change of frequencies of an SDR software and to get a classic operation of a VFO on a radio hardware SDR!Fully configurable with the supplied software, Shuttle Xpress is
This balun is the perfect accessory to connect a long wire antenna, for example with the converter HF SDR Ham it Up to listen shortwave and HF bands from 0.5 to 30Mhz, but this balun can work up to
New version of the SDRPlay wideband receiver, the RSP1A now covers all frequencies from 1 kHz to 2 GHz without hole, all modes, with up to 10 MHz bandwidth on the screen and 14-bit sampling. In
This band-cut filter is design by RTL-SDR.com, it blocks and reject broadcast FM band between 88 to 108 MHz with over 50dB of attenuation. Insertion loss is less than 0.5 dB between 0-1 GHz, and less
This high-pass notch filter is designed by RTL-SDR.com and rejects the AM broadcast from 500 kHz to 1.7 MHz, with attenuation of more than 50dB. In fact, because of the attenuation, the filter is
The Start ADS-B pack allows you to have a portable station for receiving ADS-B messages from aircraft and to follow their movements on a map in real time, via a Windows or Linux computer.Included in
MLA-30 Plus magnetic loop active antenna for receiving HF bands from 500 kHz to 30 MHz.The MLA-30+ antenna can be used with the RTL-SDR V3 stick in direct conversion mode, with the Ham it up
DX Patrol's GPSDO (GPS Disciplined Oscillator) is made up of a GPS receiver (U-Blox 7N) and a 10 Mhz OCXO oscillator with pure sine wave and very high stability (0.05ppb*), disciplined thanks to the
Laminated HamRadio Guide booklet, 2021 edition, 50 pages in A4 format (219 x 297 mm), in english bound by metal rings, for use at the station or on a laptop, in SOTA or IOTA. This booklet can be used
The Muse M-196 DBT clock radio is equipped with a USB charging socket, Bluetooth 5.0 and an FM, DAB and DAB + radio receiver , to listen to FM radio stations from 88 to 108 Mhz and receive the radio
The vintage Muse M-135 DBT set is inspired by the style of TSF radio receivers from the 1950s, it is equipped with Bluetooth and USB to be used as a connected speaker, an FM, DAB and DAB+ radio tuner,
The Muse M-128 DBT DAB radio receiver is a set equipped with Bluetooth and an FM, DAB and DAB+ tuner that allows you to enjoy music from a wooden box radio while also having access to music in
Be the first to ask a question about this product!
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal