Récepteur-émetteur SDR : Scanner à large bande HF, VHF, UHF et SHF - Passion Radio

SDR Equipement There are 31 products.

SDR Equipement
  • USB DVB-T stick with RTL2832 for SDR
    Available Online only
    RTL-SDR USB stick with R820T2

    This RTL-SDR USB stick features the Realtek RTL2832U chipset and the new R820T2 tuner specifically designed for use in SDR mode.The new R820T2 tuner offers better sensitivity (+ 2dB to 5dB) and a low noise compared to the previous R820T version.Used with a SDR software, this becomes a scanner, broadband receiver from 24 MHz to 1766 MHz (without gap) and all modes (AM, FM, SSB, CW, DATA, ADSB, DMR)!Package include : 1 Dongle TNT/SDR with 1...

    This RTL-SDR USB stick features the Realtek RTL2832U chipset and the new R820T2 tuner...

    This RTL-SDR USB stick features the Realtek RTL2832U chipset and the new R820T2 tuner specifically designed for use in SDR mode.The new R820T2 tuner offers better sensitivity (+...

    15,75 €
  • Dongle RTL-SDR.com V3 TCXO + SMA  + Bias-T + Case
    Available Online only
    Dongle RTL-SDR.com V3 TCXO + SMA + Bias-T

    Optimized version of RTL-SDR.com, with R820T2 tuner for reception from 24 to 1766 MHz. The characteristics of the dongle RTL-SDR.com v3:- TCXO at 1 PPM (better stability and precision in frequencies)- SMA female antenna connector- Realtek RTL2832U Chipset + R820T2 Tuner- Power supply Bias-T 4.5V via SMA, allows to power an LNA or an active antenna by coaxial cable- Aluminum case with passive cooling- Experimental: HF Direct Sampling mode for...

    Optimized version of RTL-SDR.com, with R820T2 tuner for reception from 24 to 1766 MHz....

    Optimized version of RTL-SDR.com, with R820T2 tuner for reception from 24 to 1766 MHz. The characteristics of the dongle RTL-SDR.com v3:- TCXO at 1 PPM (better stability and...

    24,92 €
  • BIAS-TEE for QO-100 or LNA 30MHz to 4GHz F1OPA
    Available Online only
    BIAS-TEE for QO-100 or LNA 30MHz to 4GHz F1OPA

    This BT4G-based BIAS-TEE is used to power a LNA or a 10Ghz PLL LNB to receive the QO-100 / Es'Hail2 satellite.The BT4G covers the frequency bands from 30 MHz to 4 GHz. The +/- supply leads are soldered to the PAD board.This Bias-T is equipped with a resettable fuse (PTC) and an LED indicator to indicate the flow of current.Comes with: 1 Bias-T PCB008AA OPA Design. Assembled en tested in Europe.

    This BT4G-based BIAS-TEE is used to power a LNA or a 10Ghz PLL LNB to receive the...

    This BT4G-based BIAS-TEE is used to power a LNA or a 10Ghz PLL LNB to receive the QO-100 / Es'Hail2 satellite.The BT4G covers the frequency bands from 30 MHz to 4 GHz. The +/-...

    13,25 €
  • USB DVB-T & TNT HD stick receiver for laptop & smartphone
    Available Online only
    USB DVB-T & TNT HD stick receiver for...

    This HD DVB-T stick allows you to receive free TV channels DVB-T and compatible with DVB-T HD, from a PC, laptop, Raspberry Pi or smartphone with an OTG cable.The USB stick can also be used as a receiver and scanner from 24Mhz to 1766Mhz (without hole) in RTL-SDR receiver. Equipped with the RTL2832U chipset and the R820T2 tuner.Compatible with Windows, 7, 8 and 10, and Linux. In Windows 10, it may be necessary to add the audio codecs (AC3) to...

    This HD DVB-T stick allows you to receive free TV channels DVB-T and compatible with...

    This HD DVB-T stick allows you to receive free TV channels DVB-T and compatible with DVB-T HD, from a PC, laptop, Raspberry Pi or smartphone with an OTG cable.The USB stick can...

    19,08 €
  • USB VFO jog Shuttle Xpress Contour Design for SDR
    Available Online only
    USB VFO jog Shuttle Xpress Contour Design for SDR

    Allows to control by USB the change of frequencies of an SDR software and to get a classic operation of a VFO on a radio hardware SDR!Fully configurable with the supplied software, Shuttle Xpress is compatible with SDR software that features keyboard shortcuts such as HDSDR, SDRuno (list of keyboard shortcuts available for download below), and audio and video editing software. Works with Windows Vista, XP, 7, 8 and 10 and Mac OS.The Shuttle...

    Allows to control by USB the change of frequencies of an SDR software and to get a...

    Allows to control by USB the change of frequencies of an SDR software and to get a classic operation of a VFO on a radio hardware SDR!Fully configurable with the supplied...

    45,75 €
  • Passion SDR Pack RX 0.5-1766Mhz
    Available Online only
    Passion SDR Pack V2

    New version of Passion Radio SDR pack with RTL2832U and new R820T2 tuner and new Ham It Up v1.3 that offers better sensitivity and selectivity. The pack Passion Radio SDR transforms a computer, PC or Mac, Raspberry Pi, Arduino in RDS radio receiver, ie a broadband scanner for receiving all HF radio, VHF and UHF for less than 90 €! It allows to receive radio frequencies from 0.5 to 1766 MHz (without holes) in all AM, FM modes, SSB, CW and...

    New version of Passion Radio SDR pack with RTL2832U and new R820T2 tuner and new Ham It...

    New version of Passion Radio SDR pack with RTL2832U and new R820T2 tuner and new Ham It Up v1.3 that offers better sensitivity and selectivity. The pack Passion Radio SDR...

    65,83 €
  • LNA preamp VHF-UHF SDR
    Available Online only
    LNA preamp VHF-UHF SDR

    The LNA4ALL is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors and for RF frequencies covering all bands from 28MHZ to 2500 MHz. It improves greatly reception performance, on VHF-UHF (up to 2.5GHz) bands, of a USB stick TNT / RTL-SDR or the HackRF One and Airspy. Power is to build yourself via a 6V/9V by connecting simply 2 power cables or 5V with a modification on the board. The LNA4ALL can also be powered...

    The LNA4ALL is a pre-amplifier and a low-pass filter (LNA) with SMA female RF...

    The LNA4ALL is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors and for RF frequencies covering all bands from 28MHZ to 2500 MHz. It improves greatly...

    29,58 €
  • HackRF One SDR Tranceiver
    Available Online only
    HackRF One SDR Tranceiver

    The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the sensitivity of the device is sufficient. To use as receiver only we recommend the addition of an LNA preamplifier and an external antenna adapted to the frequency bands used. Or you may have a look at the SDRPlay RSP2 PRO receiver from 0.5 to 2Ghz.Optional: Aluminum Case,...

    The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all...

    The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the...

    249,17 €
  • Nooelec USB stick with E4000 tuner 55-2300Mhz (TCXO option)
    Available Online only
    Nooelec USB stick with E4000 tuner 55-2300Mhz...

    This Nooelec USB RTL-SDR stick is equipped with the Realtek chipset RTL2832U and E4000 tuner offering a wider frequency coverage than R820T2. Associated with SDR software, this USB stick will become a broadband receiver-scanner fro 65-2300 MHz (approximately), with a gap around 1100 MHz to 1250 MHz. An important advantage of the NeSDR XTR stick from Nooelec is its low power consumption for portable and embedded use with 170mA at 5V DC, about...

    This Nooelec USB RTL-SDR stick is equipped with the Realtek chipset RTL2832U and E4000...

    This Nooelec USB RTL-SDR stick is equipped with the Realtek chipset RTL2832U and E4000 tuner offering a wider frequency coverage than R820T2. Associated with SDR software, this...

    35,42 €
  • Ham it Up 1.3 Converter HF
    Available Online only
    Ham it Up 1.3 & 1.3+ Converter HF 0.5-50Mhz...

    Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of modulation, from a RTL-SDR RTL2832U usb stick with R820T / R820T2 or E4000 tuner, or any VHF or SDR receiver covering 125Mhz-175Mhz. The Ham it up card is compatible with the HackRF One and can be used in transmission with an input power of up to 5mW. Optional: New...

    Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter...

    Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of...

    40,00 €
  • Passion SDR Pack RX 0.5-1766Mhz
    Available Online only
    Deluxe SDR Passion Pack V2

    The new Deluxe Passion Radio SDR pack version include: - 1 USB TNT SDR stick new release (RTL2832U + tuner R820T2) - 1 converter HF SDR Ham it Up 1.3 (new release) - 1 USB cable male A-B 2.0 of 1.4 meters - 1 pigtail MCX male SMA male to connect the USB stick to the converter - 1 protective case specially adapted to the converter Ham it Up 1.3 (blue)- 1 adapter SMA Male <> Female UHF (SO239) to connect an external antenna to the...

    The new Deluxe Passion Radio SDR pack version include: - 1 USB TNT SDR stick new...

    The new Deluxe Passion Radio SDR pack version include: - 1 USB TNT SDR stick new release (RTL2832U + tuner R820T2) - 1 converter HF SDR Ham it Up 1.3 (new release) - 1 USB...

    107,50 €
  • Dongle Yard One FSK
    Available Online only
    Dongle Yard Stick One FSK ASK GFSK

    The Yard Stick One dongle (Yet Another Radio Dongle) can transmit and receive half-duplex digital radio signals on frequencies of 300-348 MHz, 391-464 MHz and 782-928 MHz, in modulations: ASK, OOK, GFSK, 2-FSK, 4-FSK and MSK. The YardStick One dongle uses the same radio circuit that popular IM-Me console with the ability to modify the firmware to create your own radio applications. The USB Stick Yard One comes with the RFCat firmware...

    The Yard Stick One dongle (Yet Another Radio Dongle) can transmit and receive...

    The Yard Stick One dongle (Yet Another Radio Dongle) can transmit and receive half-duplex digital radio signals on frequencies of 300-348 MHz, 391-464 MHz and 782-928 MHz, in...

    99,17 €
  • LNA preamp with BIAS-T for HackRF Airspy SDRPlay
    Available Online only
    LNA preamp with BIAS-T for HackRF Airspy SDRPlay

    Preamplifier and LNA (low noise amplifier) specially adapted with BIAS-T for HackRF One, AirSpy, SDRPlay and RTL-SDR V3 usb stick. It highly increases the reception performance (+ 11dB to + 23dB) and operates on frequencies from 28MHz to 2500MHz (2.5Ghz). This version of LNA4ALL, modified by the original designer, allows to be powered directly via the SMA wiht BIAS-T + 3.3V power of HackRF One, Airspy, SDRPlay and RTL-SDR V3 USB stick....

    Preamplifier and LNA (low noise amplifier) specially adapted with BIAS-T for HackRF...

    Preamplifier and LNA (low noise amplifier) specially adapted with BIAS-T for HackRF One, AirSpy, SDRPlay and RTL-SDR V3 usb stick. It highly increases the reception performance...

    33,25 €
  • PlutoSDR RX & TX 325 MHz - 3.8 GHz Full-Duplex
    New!
    Available
    PlutoSDR RX & TX 325 MHz - 3.8 GHz Full-Duplex

    The PlutoSDR (Adalm-Pluto) is an open-source SDR receiver and transmitter covering frequencies from 325MHz to 3.8GHz in half and full-duplex with a bandwidth of 20Mhz in 12bits.Adalm-Pluto was conceived as a development platform around the SDR.Works on Windows, Linux and OS X and supports the following software applications and programming languages: MATLAB, Simulink, GNU Radio, SDRangel, GQRX, SDR-Console, SoapySDR, libiio, C, C ++, C #, and...

    The PlutoSDR (Adalm-Pluto) is an open-source SDR receiver and transmitter covering...

    The PlutoSDR (Adalm-Pluto) is an open-source SDR receiver and transmitter covering frequencies from 325MHz to 3.8GHz in half and full-duplex with a bandwidth of 20Mhz in...

    165,83 €
  • HF Antenna Balun 1:9
    Available Online only
    HF Antenna Balun 1:9 for SDR

    This balun is the perfect accessory to connect a long wire antenna, for example with the converter HF SDR Ham it Up to listen shortwave and HF bands from 0.5 to 30Mhz, but this balun can work up to 90MHz. It has a high quality SMA female for connecting a coaxial cable, with protection against electrostatic discharge. Balun One Nine Nooelec includes an Antenna Guard varistor on input to protect your SDR equipment from spurious ESD. The ESD...

    This balun is the perfect accessory to connect a long wire antenna, for example with...

    This balun is the perfect accessory to connect a long wire antenna, for example with the converter HF SDR Ham it Up to listen shortwave and HF bands from 0.5 to 30Mhz, but this...

    10,42 €
  • RSP1A SDRPlay receiver 1 kHz to 2 GHz + LNA
    Available Online only
    RSP1A SDRPlay receiver 1 kHz to 2 GHz + LNA

    New version of the SDRPlay wideband receiver, the RSP1A now covers all frequencies from 1 kHz to 2 GHz without hole, all modes, with up to 10 MHz bandwidth on the screen and 14-bit sampling. In addition, the new SDRPlay RSP1A features 11 band filters that switch automatically according to the frequency used, an adjustable gain LNA preamp, a 0.5 PPM TCXO and a 4.7V BIAS-T power supply. The RSP1A works with SDR software on Windows, Mac and...

    New version of the SDRPlay wideband receiver, the RSP1A now covers all frequencies from...

    New version of the SDRPlay wideband receiver, the RSP1A now covers all frequencies from 1 kHz to 2 GHz without hole, all modes, with up to 10 MHz bandwidth on the screen and...

    99,17 €
  • SDRPlay RSPduo 1KHz to 2GHz Double Tuner 14 Bit
    Available
    SDRPlay RSPduo 1KHz to 2GHz Double Tuner 14 Bit

    The new SDRPlay RSPduo is a 14-bit SDR dual receiver that covers from 1kHz to 2GHz (without hole), with dual-tuner (simultaneous reception on 2 different antennas). The SDRDuo is equipped with a software-adjustable LNA, 11 band filters and 3 antenna connectors, 2 female SMA and 1 Hi-Z input to connect a HF wired antenna (0-30Mhz) with Notch filter and low pass 0-2Mhz, TCXO 0.5PPM, clock function and 4.7V Bias-T power supply via SMA. The 2...

    The new SDRPlay RSPduo is a 14-bit SDR dual receiver that covers from 1kHz to 2GHz...

    The new SDRPlay RSPduo is a 14-bit SDR dual receiver that covers from 1kHz to 2GHz (without hole), with dual-tuner (simultaneous reception on 2 different antennas). The SDRDuo...

    249,17 €
  • SDR VFO jog ShuttlePRO V2 Contour Design
    New!
    Available
    SDR VFO jog ShuttlePRO V2 Contour Design

    The Shuttle PRO V2 Contour Design allows to control the frequency of a SDR software and to retrieve the classic operation of a VFO on SDR radio equipment!The Shuttle PRO V2 includes 15 programmable buttons (by software), a central jog dial rubber and a rotating wheel in the center. It installs and behaves like a USB mouse.Completely configurable, the ShuttlePRO V2 is compatible with SDR software that has keyboard shortcuts such as HDSDR or...

    The Shuttle PRO V2 Contour Design allows to control the frequency of a SDR software and...

    The Shuttle PRO V2 Contour Design allows to control the frequency of a SDR software and to retrieve the classic operation of a VFO on SDR radio equipment!The Shuttle PRO V2...

    79,17 €
  • LimeSDR RX & TX 0.1MHz - 3.8GHz Full-Duplex 2x2 MIMO
    Available
    LimeSDR RX & TX 0.1MHz - 3.8GHz Full-Duplex...

    The LimeSDR is an open-source SDR receiver and transmitter covering frequencies from 0.1MHz to 3.8GHz full-duplex with a bandwidth of 64Mhz, 2x2 Mimo. It can transmit and receive UMTS, LTE, GSM, LoRa, Bluetooth, Zigbee or RFID, to name but a few. RF Transceiver: Lime Microsystems LMS7002M MIMO FPRFFPGA: Altera Cyclone IVMemory: 256 MB DDR2 SDRAMUSB 3.0 controller (Type A)Continuous frequency range: 100 kHz - 3.8 GHzBandwidth: 61.44 MHzRF...

    The LimeSDR is an open-source SDR receiver and transmitter covering frequencies from...

    The LimeSDR is an open-source SDR receiver and transmitter covering frequencies from 0.1MHz to 3.8GHz full-duplex with a bandwidth of 64Mhz, 2x2 Mimo. It can transmit and...

    354,17 €
  • Ubertooth One dongle bluetooth
    Available Online only
    Ubertooth One dongle bluetooth

    Bluetooth dongle open source 2.4 GHz come to use development platform and undertake trials in Bluetooth Class 1. The true power of Ubertooth One is the ability to write your own software to suit your needs. Ubertooth One can be used as Bluetooth spectrum analyzer in real time, sniffer Bluetooth (LAP sniffing and Kismet) packets. Come with : Ubertooth one usb stick (without case) and with antenna.

    Bluetooth dongle open source 2.4 GHz come to use development platform and undertake...

    Bluetooth dongle open source 2.4 GHz come to use development platform and undertake trials in Bluetooth Class 1. The true power of Ubertooth One is the ability to write your own...

    104,17 €
  • LimeSDR mini RX & TX 10MHz - 3.5GHz Full-Duplex
    Available
    LimeSDR mini RX & TX 10MHz - 3.5GHz Full-Duplex

    The LimeSDR is an open source SDR transceiver covering RF frequencies from 10 MHz to 3.5 GHz in full duplex , 1x1 mimo and 30.72 MHz bandwidth. RF Transmitter: Lime Microsystems LMS7002MFPGA: Altera MAX 10USB 3.012 bit Works with Windows GNU Radio, LimeSuite and HDSDR. On Linux with GNU radio. This material is intended for use in the laboratory or R&D. The LimeSDR is available without accessories, case, antenna (optional) or pack....

    The LimeSDR is an open source SDR transceiver covering RF frequencies from 10 MHz to...

    The LimeSDR is an open source SDR transceiver covering RF frequencies from 10 MHz to 3.5 GHz in full duplex , 1x1 mimo and 30.72 MHz bandwidth. RF Transmitter: Lime...

    190,83 €
  • MoRFeus Signal Generator + RF Converter from 30Mhz to 6Ghz
    On sale!
    Available
    MoRFeus Signal Generator + RF Converter from...

    MoRFeus is a broadband frequency generator and upconverter & downconverter from 30 MHz to 6 GHz. With LCD screen and front adjustment knob. MoRFeus is specifically designed to operate in 85 MHz to 5.4 GHz transmissions using these low-pass and high-pass filters. Delivered with: 1 MoRFeus with aluminum case and mounted LCD screen.

    MoRFeus is a broadband frequency generator and upconverter & downconverter from 30...

    MoRFeus is a broadband frequency generator and upconverter & downconverter from 30 MHz to 6 GHz. With LCD screen and front adjustment knob. MoRFeus is specifically designed...

    Reduced price! 194,25 €
  • PortaPack H1 for HackRF One by ShareBrained
    Available
    PortaPack H1 for HackRF One by ShareBrained

    The PortaPack, developp by ShareBrained, is the perfect complement for the HackRF One, it adds a touch screen, navigation buttons, a headphone jack, a real-time clock and a micro SD card reader.Paired with an external USB battery and you are ready to explore the radio spectrum wherever you are, without the need for a computer. New: Integrates a TCXO 2.5PPM for the clock.The PortaPack firmware is available as well as the Havoc firmware which...

    The PortaPack, developp by ShareBrained, is the perfect complement for the HackRF One,...

    The PortaPack, developp by ShareBrained, is the perfect complement for the HackRF One, it adds a touch screen, navigation buttons, a headphone jack, a real-time clock and a...

    190,83 €
  • DX Patrol MK4 SDR receiver 100kHz 2Ghz + preampli
    DX Patrol MK4 SDR receiver 100kHz 2Ghz + preampli

    The DXPatrol SDR receiver receives all radio frequencies from 100kHz to 2000 Mhz (no gap) with a maximum bandwidth of 3.2Mhz.The DX Patrol offers a ready-to-use solution to be quickly operational in SDR reception on HF, VHF-UHF bands and especially mobile or portable.The DXPatrol is supplied with an OTG cable that allows you to control it from a smartphone or a tablet with the Android SDR Touch application.Also works under Windows 7, 8 and 10....

    The DXPatrol SDR receiver receives all radio frequencies from 100kHz to 2000 Mhz (no...

    The DXPatrol SDR receiver receives all radio frequencies from 100kHz to 2000 Mhz (no gap) with a maximum bandwidth of 3.2Mhz.The DX Patrol offers a ready-to-use solution to be...

    82,50 €
  • Ettus USRP B200 MINI
    Available
    USRP B200 MINI SDR TX & RX SDR 70Mhz to 6Ghz

    SDR Transceiver wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen. The Ettus USRP B200 MINI operates in full duplex mode and is powered by USB 3.0 port. Compatible with open-source software GNU Radio (maintained by Ettus Research) and API UHD. New: Now include aluminium white case. Size: 50 x 84 mmTransmitter power: 10dBm Comes with: Board B200mini with case.

    SDR Transceiver wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of...

    SDR Transceiver wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen. The Ettus USRP B200 MINI operates in full duplex mode and...

    1 040,83 €
  • miniVNA Tiny
    Available
    miniVNA PRO² Analyzer Bluetooth 0.1 - 230 Mhz

    The mini-VNA Pro² BT is a portable VNA antenna and network analyzer that covers from 0.1 to 230Mhz, it has a 1000mAh internal Li-ion battery and a new Bluetooth interface to let use the mini-VNA Pro BT outside, directly at the base of the antenna. New version MiniVNA Pro2 BT since June 2018Improved dynamics to 100 dB (instead of 90 dB)Extended frequency at 230 MHz (instead of 200 MHz)New 24 bit converterImproved Bluetooth connectivity Main...

    The mini-VNA Pro² BT is a portable VNA antenna and network analyzer that covers from...

    The mini-VNA Pro² BT is a portable VNA antenna and network analyzer that covers from 0.1 to 230Mhz, it has a 1000mAh internal Li-ion battery and a new Bluetooth interface to let...

    357,50 €
  • BLADERF x115 RX & TX 300-3800 Mhz
    Available Online only
    BLADERF x115 RX & TX 300-3800 Mhz

    The x115 bladeRF from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz, all analog and digital modes, with appropriate software. 2 connectors antenna SMA female, Altera Cyclone IV FPGA. The BladeRF 115 can display up to 40 MHz of radio spectrum on the screen with a 12-bit sampling. Run on Linux with the open-source software GNUradio. Package includes: Board bladeRF x115 (115KLE Cyclone FPGA), USB 3.0 cable SS, 2 SMA cable....

    The x115 bladeRF from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz,...

    The x115 bladeRF from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz, all analog and digital modes, with appropriate software. 2 connectors antenna SMA female,...

    974,17 €
  • SDRPlay RSP2 PRO 1KHz to 2GHz + LNA + case
    Product available with different options Online only
    SDRPlay RSP2 PRO 1KHz to 2GHz + LNA + case

    The SDRPlay RSP2 PRO receiver covers from 1kHz to 2 GHz (without gap). With metal case, TCXO 0.5PPM, MW/FM notch filter and 88-108Mhz FM radio rejection, 24MHz clock function and 4.7V Bias-T power supply via SMA.Also equipped with a software-adjustable LNA preamp, 10 band filters and 3 antenna connectors, 2 of which are female SMA and a Z connector to connect a wire antenna for HF bands (0-30Mhz).Combined with the SDRuno, the SDRPlay RSP2PRO...

    The SDRPlay RSP2 PRO receiver covers from 1kHz to 2 GHz (without gap). With metal case,...

    The SDRPlay RSP2 PRO receiver covers from 1kHz to 2 GHz (without gap). With metal case, TCXO 0.5PPM, MW/FM notch filter and 88-108Mhz FM radio rejection, 24MHz clock function...

    165,83 €
  • BLADERF x40 RX & TX 300-3800 Mhz
    Available Online only
    BLADERF x40 RX & TX 300-3800 Mhz

    The bladeRF x40 from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz, all analog and digital modes, with appropriate software. 2 connectors antenna SMA female, Altera Cyclone IV FPGA. The BladeRF x40 can display up to 40 MHz of radio spectrum on the screen with a 12-bit sampling. Run on Linux with the open-source software GNUradio. Package includes: Board bladeRF x40 (40KLE Cyclone 4 FPGA), USB 3.0 cable SS, 2 SMA cable....

    The bladeRF x40 from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz,...

    The bladeRF x40 from Nuand is a SDR transceiver full-duplex from 300 MHz to 3.8 GHz, all analog and digital modes, with appropriate software. 2 connectors antenna SMA female,...

    624,17 €
  • USRP B210 70Mhz to 6Ghz Full Duplex SDR MIMO (2 Tx & 2 Rx)
    Available
    USRP B210 70Mhz to 6Ghz Full Duplex SDR MIMO (2...

    SDR Transceiver B210 wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen, MIMO (2 Tx & 2 Rx). The Ettus USRP B210 operates in full duplex mode, MIMO (2 Tx & 2 Rx), and is powered by USB 3.0 port. Compatible with open-source software GNU Radio (maintained by Ettus Research) and API UHD. Transmitter power: 10dBm Comes with: Board Ettus B210, USB 3.0 câble.

    SDR Transceiver B210 wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of...

    SDR Transceiver B210 wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen, MIMO (2 Tx & 2 Rx). The Ettus USRP B210 operates...

    1 658,33 €
  • BladeRF 2.0 micro TX/RX 47MHz to 6GHz 2×2 MIMO
    Available Online only
    BladeRF 2.0 micro TX/RX 47MHz to 6GHz 2×2 MIMO

    BladeRF 2.0 micro xA4/xA9 has a receive / transmit frequency in SDR from 47 MHz to 6 GHz, with a sampling frequency of 56 MHz (61.44 MHz maximum) and a 2×2 MIMO broadcast. Works with the libbladeRF library, the bladeRF 2.0 mini is compatible with GNURadio, GQRX, SDR-Radio, SDR#, gr-phosphor, SoapySDR, etc. under Windows, Linux and macOS. The xA4 features a 49KLE Intel Cyclone V FPGA including 38KLE freely programmable. The xA9 includes the...

    BladeRF 2.0 micro xA4/xA9 has a receive / transmit frequency in SDR from 47 MHz to 6...

    BladeRF 2.0 micro xA4/xA9 has a receive / transmit frequency in SDR from 47 MHz to 6 GHz, with a sampling frequency of 56 MHz (61.44 MHz maximum) and a 2×2 MIMO broadcast....

    665,83 €
create quotation from my cart Request a quote

Payment accepted: By Credit Card, VISA, MasterCard, Paypal and bank wire (T/T).

Payment method buying passion radio equipment

Secure TLS 1.2 RapidSSL


Delivery ECO with Colissimo (5-7 days) or EXPRESS with DHL, TNT, UPS, Fedex (48h/72h). More about our delivery terms.

Package prepared in 1-2 business days in ECO, and same day in EXPRESS by Fedex/UPS/DHL for orders before 10am CEST.

Return product 14 days & 2 years warranty.

Price are in Euros (€) VAT 20% Included

For company inside or outside EU, VAT don't apply, for indivudual in EU, VAT 20% apply. For individual outside EU, VAT will not be applied.

New products

Specials

Register or login with your account to see our special & discount