SDR accessory - Passion Radio

SDR accessory There are 53 products.

Subcategories

  • USB power cable 5V 9V or 12V Ripcord
    New!
    Available
    USB power cable 5V 9V or 12V Ripcord

    With the Ripcord USB power cable, you have the freedom to power anywhere you are any device in 5, 9 or 12V from a USB port of a laptop, from an external battery or from a smartphone/tablet (with OTG cable).The connector is on one side USB A Male, to connect to a laptop eg. and on the other side standard 5.5mm jack connector with the positive (+) polarity in the center and the negative (-) polarity on the outside.Maximum amperage on the 5V...

    With the Ripcord USB power cable, you have the freedom to power anywhere you are any...

    With the Ripcord USB power cable, you have the freedom to power anywhere you are any device in 5, 9 or 12V from a USB port of a laptop, from an external battery or from a...

    15,42 €
  • MMIC prototype circuit board for coaxial
    Available
    MMIC prototype circuit board for coaxial

    MMIC prototype circuit for connection with coaxial cable. Supplied without connector (coaxial soldering).This compact prototype board is compatible with more than 100 of the most popular MMIC amplifiers.Impedance: 50 ohmsAmateur radio design: WA5VJBDimensions: 35x16mmWeight: 2 grams

    MMIC prototype circuit for connection with coaxial cable. Supplied without connector...

    MMIC prototype circuit for connection with coaxial cable. Supplied without connector (coaxial soldering).This compact prototype board is compatible with more than 100 of the...

    2,46 €
  • MMIC prototyping circuit board for SMA
    Available
    MMIC prototyping circuit board for SMA

    MMIC prototype circuit for connection with SMA. Supplied without connector (SMA soldering). Fits standard SMA pin connectors including standard SMA thru-hole mount type.This compact prototype board is compatible with more than 100 of the most popular MMIC amplifiers.Impedance: 50 ohmsAmateur radio design: WA5VJBDimensions: 35x16mmWeight: 2 grams

    MMIC prototype circuit for connection with SMA. Supplied without connector (SMA...

    MMIC prototype circuit for connection with SMA. Supplied without connector (SMA soldering). Fits standard SMA pin connectors including standard SMA thru-hole mount type.This...

    2,46 €
  • Clear Acrylic Case for HackRF One by GSG
    Available
    Clear Acrylic Case for HackRF One by GSG

    Great Scott Gadgets official case, transparent acrylic for the bare HackRF card One or to replace the black plastic case of HackRF. Case to assemble (instructions below). Delivered without HackRF.

    Great Scott Gadgets official case, transparent acrylic for the bare HackRF card One or...

    Great Scott Gadgets official case, transparent acrylic for the bare HackRF card One or to replace the black plastic case of HackRF. Case to assemble (instructions below)....

    9,17 €
  • Magnet SMA Male base bracket mount Nagoya
    Available
    Magnet Nagoya base bracket mount SMA-M / SMA-F...

    Magnetic mount with antenna support connector in SMA male, for walkie-talkie to deport the antenna of the handheld (for example in car or at home).Coaxial cable: RG58 50ohms 3 meters lengthConnector base antenna support: SMA maleCable connector available: SMA male / SMA female / BNC MaleDiameter of the magnet: 53mmFor all Baofeng walkie-talkies (except UV-3R), take the antenna cable connector in SMA Female.

    Magnetic mount with antenna support connector in SMA male, for walkie-talkie to deport...

    Magnetic mount with antenna support connector in SMA male, for walkie-talkie to deport the antenna of the handheld (for example in car or at home).Coaxial cable: RG58 50ohms 3...

    16,58 €
  • Connector Hi-Z for SDRPlay RSP2 & PRO
    Available
    Connector Hi-Z for SDRPlay RSP2 & PRO

    Connector for Hi-Z antenna of the SDRPlay receiver RSP2 and RSP2PRO. 5.08 female connector with 3 poles.

    Connector for Hi-Z antenna of the SDRPlay receiver RSP2 and RSP2PRO. 5.08 female...

    Connector for Hi-Z antenna of the SDRPlay receiver RSP2 and RSP2PRO. 5.08 female connector with 3 poles.

    0,83 €
  • RF Amplifier 2400 MHz 100mW Analog Devices CN0417
    New!
    Available
    RF Amplifier 2400 MHz 100mW Analog Devices CN0417

    The Analog Devices CN0417 is a small RF power amplifier, powered by micro-USB, optimized to operate on 2400 MHz with 100mW max, gain of +21dB max., with a integrated bandpass filter 2400 to 2500Mhz and a maximum input power recommended of -2dBm.It is powered by 5V directly via a micro-USB jack (cable not supplied). RF input and output connector in SMA.This equipment is recommanded to be used with PlutoSDR/Adalm-Pluto.Compatible to be use for...

    The Analog Devices CN0417 is a small RF power amplifier, powered by micro-USB,...

    The Analog Devices CN0417 is a small RF power amplifier, powered by micro-USB, optimized to operate on 2400 MHz with 100mW max, gain of +21dB max., with a integrated bandpass...

    49,17 €
  • Broadcast AM Band Cut filter by RTL-SDR.com
    Available
    Broadcast AM Band Cut filter by RTL-SDR.com

    This high-pass notch filter is designed by RTL-SDR.com and rejects the AM broadcast from 500 kHz to 1.7 MHz, with attenuation of more than 50dB. In fact, because of the attenuation, the filter is usable from 2.5 - 2.6 MHz and above. This AM radio band rejector filter will be useful if you are subject to strong broadcast signals that disturb reception on other bands. Comes with: 1 AM Band-Stop Broadcast Filter RTL-SDR and an adapter SMA-Male.

    This high-pass notch filter is designed by RTL-SDR.com and rejects the AM broadcast...

    This high-pass notch filter is designed by RTL-SDR.com and rejects the AM broadcast from 500 kHz to 1.7 MHz, with attenuation of more than 50dB. In fact, because of the...

    16,58 €
  • RP-SMA Male Terminator 3Ghz dummy load 1W
    Available
    RP-SMA Male Terminator 3Ghz dummy load 1W

    This connector is a RP-SMA male terminator/termination endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 3Ghz. Connectors end 1: RP-SMA male (Reverse SMA)Connectors end 2: Dummy load 1W max continuousImpedance: 50 OhmsNickel plated

    This connector is a RP-SMA male terminator/termination endowed with a dummy load 50...

    This connector is a RP-SMA male terminator/termination endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 3Ghz. Connectors end 1: RP-SMA...

    4,50 €
  • USB VFO jog Shuttle Xpress Contour Design for SDR
    Available Online only
    USB VFO jog Shuttle Xpress Contour Design for SDR

    Allows to control by USB the change of frequencies of an SDR software and to get a classic operation of a VFO on a radio hardware SDR!Fully configurable with the supplied software, Shuttle Xpress is compatible with SDR software that features keyboard shortcuts such as HDSDR, SDRuno (list of keyboard shortcuts available for download below), and audio and video editing software. Works with Windows Vista, XP, 7, 8 and 10 and Mac OS.The Shuttle...

    Allows to control by USB the change of frequencies of an SDR software and to get a...

    Allows to control by USB the change of frequencies of an SDR software and to get a classic operation of a VFO on a radio hardware SDR!Fully configurable with the supplied...

    45,75 €
  • Genuine LimeSDR mini case acrylic
    Available
    Genuine LimeSDR mini case acrylic

    Official Lime Micro case for SDR dongle transceiver LimeSDR mini. Delivered with: 1 official box LimeSDR mini acrylic, without antenna nor LimeSDR mini included.

    Official Lime Micro case for SDR dongle transceiver LimeSDR mini. Delivered with: 1...

    Official Lime Micro case for SDR dongle transceiver LimeSDR mini. Delivered with: 1 official box LimeSDR mini acrylic, without antenna nor LimeSDR mini included.

    40,83 €
  • BIAS-TEE for QO-100 or LNA 30MHz to 4GHz F1OPA
    Available Online only
    BIAS-TEE for QO-100 or LNA 30MHz to 4GHz F1OPA

    This BT4G-based BIAS-TEE is used to power a LNA or a 10Ghz PLL LNB to receive the QO-100 / Es'Hail2 satellite.The BT4G covers the frequency bands from 30 MHz to 4 GHz. The +/- supply leads are soldered to the PAD board.This Bias-T is equipped with a resettable fuse (PTC) and an LED indicator to indicate the flow of current.Comes with: 1 Bias-T PCB008AA OPA Design. Assembled en tested in Europe.

    This BT4G-based BIAS-TEE is used to power a LNA or a 10Ghz PLL LNB to receive the...

    This BT4G-based BIAS-TEE is used to power a LNA or a 10Ghz PLL LNB to receive the QO-100 / Es'Hail2 satellite.The BT4G covers the frequency bands from 30 MHz to 4 GHz. The +/-...

    13,25 €
  • SMA Male Terminator 3Ghz dummy load 1W
    Available
    SMA Male Terminator 3Ghz dummy load 1W

    This connector is a male SMA terminator/termination endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 3Ghz. Connectors end 1: SMA maleConnectors end 2: Dummy load 1W max continuousImpedance: 50 OhmsNickel plated

    This connector is a male SMA terminator/termination endowed with a dummy load 50 Ohms...

    This connector is a male SMA terminator/termination endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 3Ghz. Connectors end 1: SMA...

    4,75 €
  • SMA Male Terminator dummy load 50 Ohms
    Available
    SMA Male Terminator 3Ghz dummy load 1W

    This connector is a male SMA terminator/termination endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 3Ghz. Connectors end 1: SMA maleConnectors end 2: Dummy load 1W max continuousImpedance: 50 OhmsNickel plated

    This connector is a male SMA terminator/termination endowed with a dummy load 50 Ohms...

    This connector is a male SMA terminator/termination endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 3Ghz. Connectors end 1: SMA...

    4,50 €
  • USB 2.0 Male A-B cable for Ham It Up & SDRPlay RSP
    Available
    USB 2.0 Male A-B cable for Ham It Up & SDRPlay RSP

    This is USB 2.0 A Male to 4 Pin B Male is for use with the SDR converter Ham It Up and receiver SDRPlay RSP (all version). Also available in 3 meters lenght. Also suitable forr printer or scanner.

    This is USB 2.0 A Male to 4 Pin B Male is for use with the SDR converter Ham It Up and...

    This is USB 2.0 A Male to 4 Pin B Male is for use with the SDR converter Ham It Up and receiver SDRPlay RSP (all version). Also available in 3 meters lenght. Also suitable...

    Reduced price! 3,00 €
  • Nooelec Module Tiny TCXO 10Mhz for HackRF
    Available
    Nooelec Module Tiny TCXO 10Mhz for HackRF

    This ultra-flat 10 MHz Tiny TCXO module is for HackRF One. This 0.5 ppm TCXO improves performance with ultra-low phase noise and high frequency stability in almost any condition.Perfect for any high precision experimentation with the HackRF One, such as projects with GPS.The module is very simple to install, simply connect it to the HackRF circuit board.Please note: This module can not be installed in the plastic case of HackRF One, only with...

    This ultra-flat 10 MHz Tiny TCXO module is for HackRF One. This 0.5 ppm TCXO improves...

    This ultra-flat 10 MHz Tiny TCXO module is for HackRF One. This 0.5 ppm TCXO improves performance with ultra-low phase noise and high frequency stability in almost any...

    23,75 €
  • Broadcast FM Band Cut filter by RTL-SDR.com
    Available
    Broadcast FM Band Cut filter by RTL-SDR.com

    This band-cut filter is design by RTL-SDR.com, it blocks and reject broadcast FM band between 88 to 108 MHz with over 50dB of attenuation. Insertion loss is less than 0.5 dB between 0-1 GHz, and less than 1.5 dB between 1-3 GHz. A broadcast FM block filter help if you are near strong broadcasts signal in your area that overload the SDR dongle or device. Come with : 1 filter Broadcast FM Band-Stop RTL-SDR and an adapter SMA-Male.

    This band-cut filter is design by RTL-SDR.com, it blocks and reject broadcast FM band...

    This band-cut filter is design by RTL-SDR.com, it blocks and reject broadcast FM band between 88 to 108 MHz with over 50dB of attenuation. Insertion loss is less than 0.5 dB...

    16,58 €
  • Aluminium case HackRF One - Nooelec
    Available Online only
    Aluminium case HackRF One - Nooelec

    Nooelec aluminium case V2 (new version) specifically designed for HackRF One reduce parasitic interference nearby and add a stronger resistant case. This aluminum case is for replacing the original plastic box. Comes with: 1 Nooelec genuine case V2 new version, with 2 covers, 2 front panels and 1 bag of screws.

    Nooelec aluminium case V2 (new version) specifically designed for HackRF One reduce...

    Nooelec aluminium case V2 (new version) specifically designed for HackRF One reduce parasitic interference nearby and add a stronger resistant case. This aluminum case is for...

    29,08 €
  • Antenna ANT700 300-1100Mhz SDR ADSB
    Available
    Antenna ANT700 300-1100Mhz SDR VHF UHF ADSB

    Telescopic Antenna ANT700 from 300 to 1100 MHz, made by Great Scott Gadgets. The total length of the antenna ANT700 is configurable from 9.5 cm to 24.5 cm. The ANT700 is constructed of stainless steel, it is rotated 360 ° and has an SMA male connector. It is especially recommended for HackRF One and One Yard Stick or PandwaRF tools.

    Telescopic Antenna ANT700 from 300 to 1100 MHz, made by Great Scott Gadgets. The total...

    Telescopic Antenna ANT700 from 300 to 1100 MHz, made by Great Scott Gadgets. The total length of the antenna ANT700 is configurable from 9.5 cm to 24.5 cm. The ANT700 is...

    24,08 €
  • Log Periodic Antenna 400MHz to 1GHz
    Available
    Log Periodic Antenna 400-1000MHz 6dBi WA5JVB

    PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the PCB.Frequencies: 400-1000 MHzType: Periodic LogGain: 6dBiImpedance: 50 ohmsAmateur radio design: WA5VJBDimensions: 53x55mmWeight: 6 grams

    PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6...

    PCB Log periodic antenna, for frequency from 400 to 1000MHz with a gain of 6 dBi.Supplied without SMA connector (soldering) or via a coaxial cable soldered directly to the...

    49,17 €
  • Raspberry Pi 3 B/B+ Quad Core 1.4Ghz WiFi dualband Bluetooth 1GB
    Available
    Raspberry Pi 3 B/B+ Quad Core 1.4Ghz WiFi...

    The new Raspberry Pi 3 model B & B+ features a 1.4Ghz Quad Core processor, WiFi 2.4Ghz / 5Ghz and Bluetooth Low Energy (BLE), making it even easier to develop RF and IoT radio applications. CPU Broadcom Quad Core BCM2837B0, Cortex-A53 64-bit 1.4GHz1 GB RAM memoryWi-Fi 802.11 b/g/n/ac Cypress CYW43455 (2.4 Ghz and 5Ghz)Bluetooth Low Energy 4.2GPIO 40-pin4 USB 2.0 portsStereo output (3.5mm jack) and composite video portHDMI FullHD Jack -...

    The new Raspberry Pi 3 model B & B+ features a 1.4Ghz Quad Core processor, WiFi...

    The new Raspberry Pi 3 model B & B+ features a 1.4Ghz Quad Core processor, WiFi 2.4Ghz / 5Ghz and Bluetooth Low Energy (BLE), making it even easier to develop RF and IoT...

    40,00 €
  • Nooelec RF Shield Kit for HackRF One
    Available Online only
    Nooelec RF Shield Kit for HackRF One

    This RF shield Nooelec and component kit is specifically designed for HackRF One to eliminates EMI nearby. Comes with: RF shield, shield frame, shield cover, GND clip testpoint, J10, and a 20 position female header for P30 (BANK2_AUX). Delivered with: Nooelec official shield kit (Armature with metal cover, 20-position female connector). This kit requires soldering basic skills.

    This RF shield Nooelec and component kit is specifically designed for HackRF One to...

    This RF shield Nooelec and component kit is specifically designed for HackRF One to eliminates EMI nearby. Comes with: RF shield, shield frame, shield cover, GND clip...

    10,42 €
  • SMA Male Terminator 6Ghz dummy load 1W
    Available
    SMA Male Terminator 6Ghz dummy load 1W

    This connector is a male SMA terminator endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 6Ghz. Connectors end 1: SMA maleConnectors end 2: Dummy load 1W max continuousImpedance: 50 Ohms

    This connector is a male SMA terminator endowed with a dummy load 50 Ohms for a maximum...

    This connector is a male SMA terminator endowed with a dummy load 50 Ohms for a maximum power of 1 watt on frequencies from 0 to 6Ghz. Connectors end 1: SMA maleConnectors end...

    8,25 €
  • LNA preamp VHF-UHF SDR
    Available Online only
    LNA preamp VHF-UHF SDR

    The LNA4ALL is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors and for RF frequencies covering all bands from 28MHZ to 2500 MHz. It improves greatly reception performance, on VHF-UHF (up to 2.5GHz) bands, of a USB stick TNT / RTL-SDR or the HackRF One and Airspy. Power is to build yourself via a 6V/9V by connecting simply 2 power cables or 5V with a modification on the board. The LNA4ALL can also be powered...

    The LNA4ALL is a pre-amplifier and a low-pass filter (LNA) with SMA female RF...

    The LNA4ALL is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors and for RF frequencies covering all bands from 28MHZ to 2500 MHz. It improves greatly...

    29,58 €
  • SMA Calibration Kit with 50 Ohm dummy load for MiniVNA
    Available
    SMA Calibration Kit with 50 Ohm dummy load for...

    This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit and a short circuit.Supplied with: 1 SMA 50 Ohm dummy load, 1 open SMA circuit and 1 short circuit.

    This calibration kit can be used with any SMA connector device, such as the MiniVNA...

    This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit...

    24,92 €
  • HF Antenna Balun 1:9
    Available Online only
    HF Antenna Balun 1:9 for SDR

    This balun is the perfect accessory to connect a long wire antenna, for example with the converter HF SDR Ham it Up to listen shortwave and HF bands from 0.5 to 30Mhz, but this balun can work up to 90MHz. It has a high quality SMA female for connecting a coaxial cable, with protection against electrostatic discharge. Balun One Nine Nooelec includes an Antenna Guard varistor on input to protect your SDR equipment from spurious ESD. The ESD...

    This balun is the perfect accessory to connect a long wire antenna, for example with...

    This balun is the perfect accessory to connect a long wire antenna, for example with the converter HF SDR Ham it Up to listen shortwave and HF bands from 0.5 to 30Mhz, but this...

    10,42 €
  • SDR VFO jog ShuttlePRO V2 Contour Design
    New!
    Available
    SDR VFO jog ShuttlePRO V2 Contour Design

    The Shuttle PRO V2 Contour Design allows to control the frequency of a SDR software and to retrieve the classic operation of a VFO on SDR radio equipment!The Shuttle PRO V2 includes 15 programmable buttons (by software), a central jog dial rubber and a rotating wheel in the center. It installs and behaves like a USB mouse.Completely configurable, the ShuttlePRO V2 is compatible with SDR software that has keyboard shortcuts such as HDSDR or...

    The Shuttle PRO V2 Contour Design allows to control the frequency of a SDR software and...

    The Shuttle PRO V2 Contour Design allows to control the frequency of a SDR software and to retrieve the classic operation of a VFO on SDR radio equipment!The Shuttle PRO V2...

    79,17 €
  • Cable 1 meter SMA-UHF Male
    On sale!
    Available
    Cable coaxial 1 or 5m SMA-Male MCX-Male 50 ohms

    Coaxial cable SMA Male to MCX Male with 50-ohms coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 1 or 5 metersConnector 1: SMA MaleConnector 2: MCX Male

    Coaxial cable SMA Male to MCX Male with 50-ohms coaxial cable low loss KSR195 for use...

    Coaxial cable SMA Male to MCX Male with 50-ohms coaxial cable low loss KSR195 for use from 0 to 6GHz.Length: 1 or 5 metersConnector 1: SMA MaleConnector 2: MCX Male

    Reduced price! 8,33 €
  • Adhesive backed mount for flat surface & glass
    Available
    Adhesive backed mount for flat surface & glass

    Adhesive backed for flat surface installations including glass, fiberglass, and metal.

    Adhesive backed for flat surface installations including glass, fiberglass, and metal.

    Adhesive backed for flat surface installations including glass, fiberglass, and metal.

    41,58 €
  • HF VHF UHF Duplexer
    Available
    HF VHF UHF Duplexer DIAMOND-MX72H

    HF VHF UHF Duplexer Diamond MX72H.

    HF VHF UHF Duplexer Diamond MX72H.

    HF VHF UHF Duplexer Diamond MX72H.

    38,25 €
  • LNA for ADS-B & SAW filter for 1090 Mhz
    Available
    LNA for ADS-B & SAW filter for 1090 Mhz

    This LNA and SAW filter for the 1090Mhz improves ADS-B reception performance and increases the number of messages and data received from aircraft.This equipment combines 2 SAW filters and a LNA with a gain of 27 dB, with a noise factor of about 1 dB and an attenuation greater than 60 dB outside the 1090 MHz band.It is designed to be powered by BIAS-T with for example the RTL-SDR V3 dongle. Requires a 3 to 5V power supply in bias-T. The RTL-SDR...

    This LNA and SAW filter for the 1090Mhz improves ADS-B reception performance and...

    This LNA and SAW filter for the 1090Mhz improves ADS-B reception performance and increases the number of messages and data received from aircraft.This equipment combines 2 SAW...

    29,92 €
  • Case for transverter XB 200
    Available Online only
    Case for transverter XB 200

    Case for transverter Nuand XB200.

    Case for transverter Nuand XB200.

    Case for transverter Nuand XB200.

    22,42 €
  • Genuine LimeSDR acrylic case
    Available
    Genuine LimeSDR acrylic case

    Official Lime Micro acrylic case for LimeSDR transceiver. Delivered with: 1 acrylic box to mount for LimeSDR. Antenna not supplied (in option).

    Official Lime Micro acrylic case for LimeSDR transceiver. Delivered with: 1 acrylic...

    Official Lime Micro acrylic case for LimeSDR transceiver. Delivered with: 1 acrylic box to mount for LimeSDR. Antenna not supplied (in option).

    99,17 €
  • PL Magnetic base 145cm
    Available
    Magnetic mount 145mm with cable PL259

    Magnetic base of 14.5cm in diameter for screwing a PL-259 antenna (UHF-male) to land on a car roof or any 1m² minimum metal surface. The BM145 magnetic base from CRT France, allows support of large antennas over 1 meter and frequencies from 0 to 500Mhz. Comes with: Magnetic mount BM145, coaxial cable of 3.8m with PL-259 (UHF-Male), with a replacement rubber sole offered.

    Magnetic base of 14.5cm in diameter for screwing a PL-259 antenna (UHF-male) to land on...

    Magnetic base of 14.5cm in diameter for screwing a PL-259 antenna (UHF-male) to land on a car roof or any 1m² minimum metal surface. The BM145 magnetic base from CRT France,...

    15,83 €
  • Set of 4 GSM 3G 4G antennas for LimeSDR + U.Fl cables
    Available
    Set of 4 GSM 3G 4G antennas for LimeSDR + U.Fl...

    Set of 4 omnidirectional antennas optimized for 4G (LTE, HSPA, UMTS), 3G, EDGE, GSM GPRS frequencies of 800-960 MHz, 1710-2170 MHz and 2400-2700 MHz. Supplied with 4 U.Fl to SMA adapter cables and compatible with LimeSDR. Come with: 4 multi-band GSM LimeSDR antennas + 4 U.Fl to SMA adapter cables.

    Set of 4 omnidirectional antennas optimized for 4G (LTE, HSPA, UMTS), 3G, EDGE, GSM...

    Set of 4 omnidirectional antennas optimized for 4G (LTE, HSPA, UMTS), 3G, EDGE, GSM GPRS frequencies of 800-960 MHz, 1710-2170 MHz and 2400-2700 MHz. Supplied with 4 U.Fl to...

    82,50 €
  • ANT500 SDR ADSB antenna 75-1000Mhz SMA-M
    Available Online only
    ANT500 SDR ADSB antenna 75-1000Mhz SMA-M

    Telescopic antenna ANT500, VHF-UHF 50 ohms designed to operate in RX from 75 MHz to 1 GHz. Configurable length of 20 cm to 88 cm. Stainless steel SMA male connector and elbow swivel 360 °. This is an antenna for use with a broadband or HackRF One, SDRPlay. Works for SDR reception, VHF, UHF or ADSB. We propose also an effective antenna model: Diamond SRH-789 and Nagoya NA-707.

    Telescopic antenna ANT500, VHF-UHF 50 ohms designed to operate in RX from 75 MHz to 1...

    Telescopic antenna ANT500, VHF-UHF 50 ohms designed to operate in RX from 75 MHz to 1 GHz. Configurable length of 20 cm to 88 cm. Stainless steel SMA male connector and elbow...

    24,92 €
  • Magnet SMA base bracket
    Available
    Magnet SMA base bracket

    Diamond MCRMSMA is a magnet base bracket for handheld transceivers and any devices with SMA connector. Coaxial cable: RG58 2.5m Connector: SMA Male / SMA FemaleMagnet diameter: 53mm

    Diamond MCRMSMA is a magnet base bracket for handheld transceivers and any devices with...

    Diamond MCRMSMA is a magnet base bracket for handheld transceivers and any devices with SMA connector. Coaxial cable: RG58 2.5m Connector: SMA Male / SMA FemaleMagnet diameter:...

    41,58 €
  • Splitter/Combiner for RX 0.5 to 500MHz
    Available
    Splitter/Combiner for RX 0.5 to 500MHz

    Diamond SS500 splitter/combiner for recieving from 0.5 to 500MHz, serves to connect 2 differents antennas to 1 receiver or 1 antenna to 2 receivers. Impedance:50ohmsWeight:130g Connector: SO-239

    Diamond SS500 splitter/combiner for recieving from 0.5 to 500MHz, serves to connect 2...

    Diamond SS500 splitter/combiner for recieving from 0.5 to 500MHz, serves to connect 2 differents antennas to 1 receiver or 1 antenna to 2 receivers. Impedance:50ohmsWeight:130g...

    65,83 €
  • Log Periodic Antenna 850MHz to 6.5 GHz
    Available
    Log Periodic Antenna 850 MHz to 6.5 GHz

    This directional Log Periodic antenna is designed in PCB and operates from 850MHz to 6,5GHz with 5-6 dBi gain. Works with Ettus USRP B200mini and all equipment operating in this frequency range. The antenna connector is SMA female and comes with the antenna (you just will have to make the solder to the PCB antenna card). Optional: Cable and adapter SMA Male <> SMA Male to connect the antenna to the SDR device SDR Package includes:...

    This directional Log Periodic antenna is designed in PCB and operates from 850MHz to...

    This directional Log Periodic antenna is designed in PCB and operates from 850MHz to 6,5GHz with 5-6 dBi gain. Works with Ettus USRP B200mini and all equipment operating in...

    70,83 €
  • Enclosure kit for Ettus USRP B200 MINI
    Available
    Enclosure kit for Ettus USRP B200 MINI

    Ettus official protective metal case for the USRP B200 MINI SDR transceiver. This enclosure kit allows users to assemble a steel case to protect the B200MINI board-only device, and increases operating temperature range from 0–40 °C to -20 – 60 °C. (C-Grade) Comes with: Case for Ettus USRP B200mini only (top enclosure, bottom enclosure, adhesive feet, screws, nuts and washers, torx key and assembly guide.

    Ettus official protective metal case for the USRP B200 MINI SDR transceiver. This...

    Ettus official protective metal case for the USRP B200 MINI SDR transceiver. This enclosure kit allows users to assemble a steel case to protect the B200MINI board-only device,...

    49,17 €
  • Nuand case for bladeRF 2.0 micro
    Available
    Nuand case for bladeRF 2.0 micro

    Case for bladeRF 2.0 micro from Nuand.

    Case for bladeRF 2.0 micro from Nuand.

    Case for bladeRF 2.0 micro from Nuand.

    29,92 €
  • Genuine LimeSDR mini case acrylic
    Available
    Pair of 2 GSM 3G 4G antennas for LimeSDR mini

    Two omnidirectional antennas with male SMA connectors, compatible with LimeSDR mini and HackRF One, optimized for LTE, 4G, HSPA, UMTS, 3G, EDGE, GPRS frequency ranges of 800-960 MHz, 1710-2170 MHz and 2400-2700 MHz. Comes with: 2 LimeSDR mini antennas multi-band 800-2700Mhz.

    Two omnidirectional antennas with male SMA connectors, compatible with LimeSDR mini and...

    Two omnidirectional antennas with male SMA connectors, compatible with LimeSDR mini and HackRF One, optimized for LTE, 4G, HSPA, UMTS, 3G, EDGE, GPRS frequency ranges of 800-960...

    40,83 €
  • Aluminium case for Nooelec Ham It Up HF converter
    Available Online only
    Aluminium case for Nooelec Ham It Up HF converter

    Provides an effective protection against impact and parasites for your converter HF SDR Ham It Up and also gives it a nice looking. The enclosure is made of aluminum and laser engraved, with 2 cutouts for the SMA Female RF sockets, 1 cut-out for the USB connector and one for the switch of the converter SDR HF Ham It Up. Comes with: Aluminum case with two aluminum panels, assembly instructions. (Ham it up board is not included). You need to...

    Provides an effective protection against impact and parasites for your converter HF SDR...

    Provides an effective protection against impact and parasites for your converter HF SDR Ham It Up and also gives it a nice looking. The enclosure is made of aluminum and laser...

    Reduced price! 20,50 €
  • Case for bladeRF
    Available Online only
    Case for bladeRF x40 & x115

    Genuine case for Nuand BladeRF X40 or x115.

    Genuine case for Nuand BladeRF X40 or x115.

    Genuine case for Nuand BladeRF X40 or x115.

    29,08 €
  • LNA & SAW filter for Outernet and Inmarsat
    LNA & SAW filter for Outernet and Inmarsat

    This LNA and SAW filter from Nooelec is specially designed to operate on 1.5Ghz Outernet frequency band and for Inmarsat radio applications, covering from 1.50GHz to 1.58GHz. It significantly improves the reception performance of the Outernet and Inmarsat signals. Perfect complement to the HackRF One or the RTL-SDR E4000.Equipped with SMA Female connectors, the module must be supplied with Bias-Tee between 3.0 V and 5.5 V with a minimum...

    This LNA and SAW filter from Nooelec is specially designed to operate on 1.5Ghz...

    This LNA and SAW filter from Nooelec is specially designed to operate on 1.5Ghz Outernet frequency band and for Inmarsat radio applications, covering from 1.50GHz to 1.58GHz. It...

  • Magnetic mount 145mm with cable PL259
    Available
    Magnetic mount 145mm with cable PL259

    Magnetic base of 14.5cm in diameter for screwing a PL-259 antenna (UHF-male) to land on a car roof or any 1m² minimum metal surface. The BM145 magnetic base from CRT France, allows support of large antennas over 1 meter and frequencies from 0 to 500Mhz. Comes with: Magnetic mount BM145, coaxial cable of 3.8m with PL-259 (UHF-Male), with a replacement rubber sole offered.

    Magnetic base of 14.5cm in diameter for screwing a PL-259 antenna (UHF-male) to land on...

    Magnetic base of 14.5cm in diameter for screwing a PL-259 antenna (UHF-male) to land on a car roof or any 1m² minimum metal surface. The BM145 magnetic base from CRT France,...

    24,17 €
  • LNA Wide Band 50-4000Mhz RTL-SDR
    Available
    LNA Wide Band 50-4000Mhz RTL-SDR

    This wide-band LNA preamp improves reception performance from 50 Mhz to 4 Ghz, it is based on SPF5189Z, with a noise factor of less than 1 dB.This LNA is designed to be powered by BIAS-T with a power supply of 3 to 5V. The RTL-SDR V3 dongle has a Bias-T function that provides 4.5V and is ideally suited.It is possible to feed this LNA live with an external power supply, but you will not be able to use the box in this case.Delivered with: 1...

    This wide-band LNA preamp improves reception performance from 50 Mhz to 4 Ghz, it is...

    This wide-band LNA preamp improves reception performance from 50 Mhz to 4 Ghz, it is based on SPF5189Z, with a noise factor of less than 1 dB.This LNA is designed to be powered...

    20,75 €
  • Enclosure kit for Ettus USRP B200 & B210
    New!
    Available
    Enclosure kit for Ettus USRP B200 & B210

    Ettus official protective metal case for the USRP B200 and B210 SDR transceiver Green PCB series only. This enclosure kit allows to assemble a steel case to protect the B200/B210 board-only device, and increases operating temperature range from 0–40°C to -20 – 60°C. (C-Grade) Comes with: Case for Ettus USRP B200/210 Green PCB only, top enclosure, bottom enclosure, adhesive feet, screws, nuts and washers, torx key and assembly guide. This...

    Ettus official protective metal case for the USRP B200 and B210 SDR transceiver Green...

    Ettus official protective metal case for the USRP B200 and B210 SDR transceiver Green PCB series only. This enclosure kit allows to assemble a steel case to protect the...

    112,50 €
  • Enclosure kit USRP B205MINI-I Ettus
    New!
    Available
    Enclosure kit USRP B205MINI-I Ettus

    Ettus official protective metal case for the USRP B205MINI SDR transceiver. This enclosure kit allows users to assemble a steel case to protect the B205MINI-i board-only device, and increases operating temperature range from 0–45°C to -40–75°C. (I-Grade) Comes with: Enclosure kit for Ettus USRP B205min-ii only, top enclosure, bottom enclosure, adhesive feet, screws, nuts and washers, torx key and assembly guide.

    Ettus official protective metal case for the USRP B205MINI SDR transceiver. This...

    Ettus official protective metal case for the USRP B205MINI SDR transceiver. This enclosure kit allows users to assemble a steel case to protect the B205MINI-i board-only device,...

    149,17 €
  • Ham it Up 1.3 Converter HF
    Available Online only
    Ham it Up 1.3 & 1.3+ Converter HF 0.5-50Mhz...

    Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of modulation, from a RTL-SDR RTL2832U usb stick with R820T / R820T2 or E4000 tuner, or any VHF or SDR receiver covering 125Mhz-175Mhz. The Ham it up card is compatible with the HackRF One and can be used in transmission with an input power of up to 5mW. Optional: New...

    Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter...

    Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of...

    40,00 €
  • Filtre et préampli HF pour SDR
    Available Online only
    Preamp LNA for HF SDR

    The LNA4HF is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors and for RF frequencies covering all bands from 150 kHz to 30 MHz. It improves greatly reception performance, on shortwave and HF amateur bands, for a USB stick TNT / RTL-SDR or the HackRF One. Power is to build yourself via a 6V/9V by connecting simply 2 power cables or 5V with a modification on the board. It is also possible to remove the LNA filter to...

    The LNA4HF is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors...

    The LNA4HF is a pre-amplifier and a low-pass filter (LNA) with SMA female RF connectors and for RF frequencies covering all bands from 150 kHz to 30 MHz. It improves greatly...

    28,75 €
  • LNA preamp with BIAS-T for HackRF Airspy SDRPlay
    Available Online only
    LNA preamp with BIAS-T for HackRF Airspy SDRPlay

    Preamplifier and LNA (low noise amplifier) specially adapted with BIAS-T for HackRF One, AirSpy, SDRPlay and RTL-SDR V3 usb stick. It highly increases the reception performance (+ 11dB to + 23dB) and operates on frequencies from 28MHz to 2500MHz (2.5Ghz). This version of LNA4ALL, modified by the original designer, allows to be powered directly via the SMA wiht BIAS-T + 3.3V power of HackRF One, Airspy, SDRPlay and RTL-SDR V3 USB stick....

    Preamplifier and LNA (low noise amplifier) specially adapted with BIAS-T for HackRF...

    Preamplifier and LNA (low noise amplifier) specially adapted with BIAS-T for HackRF One, AirSpy, SDRPlay and RTL-SDR V3 usb stick. It highly increases the reception performance...

    33,25 €
  • Angled USB OTG Host Cable Adapter For Samsung Galaxy S2 S3 S4 S5
    Available
    Angled micro-USB OTG Host Cable Adapter Samsung...

    USB OTG host cable adapter ompatible with Motorola Xoom, Samsung Galaxy S2/S3/S4/S5, Nokia N900/N810, and any other Micro USB devices with USB Host mode support features supported. - Connector Micro B male to USB A Female- Data synchro & charging support cable- Universal micro-USB compatibility- Angled for better easy use of the connected device Allow you to connect most of USB Flash Drive, Mouse, Keyboard and of course a RTL-SDR USB...

    USB OTG host cable adapter ompatible with Motorola Xoom, Samsung Galaxy S2/S3/S4/S5,...

    USB OTG host cable adapter ompatible with Motorola Xoom, Samsung Galaxy S2/S3/S4/S5, Nokia N900/N810, and any other Micro USB devices with USB Host mode support features...

    1,67 €
create quotation from my cart Request a quote

Payment accepted: By Credit Card, VISA, MasterCard, Paypal and bank wire (T/T).

Payment method buying passion radio equipment

Secure TLS 1.2 RapidSSL


Delivery ECO with Colissimo (5-7 days) or EXPRESS with DHL, TNT, UPS, Fedex (48h/72h). More about our delivery terms.

Package prepared in 1-2 business days in ECO, and same day in EXPRESS by Fedex/UPS/DHL for orders before 10am CEST.

Return product 14 days & 2 years warranty.

Price are in Euros (€) VAT 20% Included

For company inside or outside EU, VAT don't apply, for indivudual in EU, VAT 20% apply. For individual outside EU, VAT will not be applied.

New products

Specials

Register or login with your account to see our special & discount